EN
- Overview
- Specifications
- Description
- Applications
- Competitive Advantage
- FAQ
- Recommended Products
Overview
Place of Origin: |
Sweden |
Brand Name: |
ABB |
Model Number: |
DSQC 352A |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
5-7 days |
Payment Terms: |
T/T |
Supply Ability: |
In stock |
Specifications
|
Parameter |
Value |
|
Type |
PROFIBUS Module |
|
Dimensions |
17 × 11.6 × 5.3 cm |
|
Weight |
0.58 kg |
|
Supply Voltage |
24 V DC (via X5, IRC5 internal bus supply) |
|
Power Consumption |
5 W |
|
Communication Protocol |
Profibus DP V0/V1 (Slave) |
|
Physical Interface |
1 × 9-pin D-sub connector (Profibus DP) |
|
Supported SW Connections |
Polled / Change-of-State / Change-of-State with acknowledge suppression |
|
Max I/O Points |
128 DI + 128 DO |
|
Baud Rates Supported |
9.6 kbps to 12 Mbps |
|
Station Address Range |
0–125 (set via DIP switch) |
|
Termination Resistor |
Built-in selectable termination (ON/OFF) |
|
Operating Temperature |
0 °C to +45 °C |
|
Storage Temperature |
-25 °C to +70 °C |
|
Humidity |
5%–95% RH (non-condensing) |
|
Protection Class |
IP20 (installed inside IRC5 cabinet) |
Description
The DSQC 352A is a Profibus Module normally mounted in the control module. As an option, it may also be mounted in an external I/O unit. The unit handles input and output signals between the DeviceNet system and the PROFIBUSDP system.
Applications
Automotive assembly plant: Real-time feedback of robot welding path data to Siemens S7 series PLC.
Food processing plant: Synchronizing the gripping cycle of palletizing robots on multi-machine collaborative production lines.
Home appliance manufacturing plant: Providing logical communication between the vision guidance system and robots on the production line.
Rubber and tire factory: Remotely monitoring the operating current and status of robots in high-temperature vulcanization workshops.
Pharmaceutical packaging plant: Achieving batch data integration between robots and the central control system in aseptic production lines.
Competitive Advantage
Profibus DP Slave Communication: Connects to the Profibus DP network as a slave station, exchanging data periodically with the master station (PLC/DCS).
High-Capacity I/O Mapping: Supports bus data mapping of up to 128 digital inputs (DI) + 128 digital outputs (DO), meeting the communication needs of complex robot workstations.
High-Speed Data Transmission: Supports Profibus DP standard baud rates (9.6 kbps~12 Mbps), default 1.5 Mbps.
Plug and Play Configuration: Quickly configure station addresses, I/O mappings, and communication parameters via RobotStudio software or IRC5 teach pendant.
Real-Time Status Monitoring: Onboard LED indicators visually display communication status, faults, and operating modes.
Electrical Isolation Protection: Electrical isolation between the bus side and the robot side enhances anti-interference capabilities and ensures system stability.
FAQ
Q: What is the DSQC 352A?
A: It is a PROFIBUS module.
Q1: Is the DSQC 352A module DeviceNet or PROFIBUS?
A: The DSQC 352A is specifically designed for PROFIBUS DP. Please do not confuse it with 352 (DeviceNet).
Q2: If the DSQC 352A module is faulty, will it work after replacing it with a new one?
A: You need to completely copy the DIP switch positions from the old module to the new module and confirm the cable connections.
Q3: What is the maximum transmission distance of the DSQC 352A?
A: It depends on the baud rate. It typically reaches 200 meters at 1.5 Mbps, and even further at lower speeds.
Q4: Does the DSQC 352A support hot-swapping PROFIBUS connectors?
A: Not recommended. Hot-swapping may cause bus signal glitches, leading to a shutdown and error message for the entire production line.
