EN
- Overview
- Specifications
- Description
- Environment and certification
- Applications
- Features and benefits
- Diagnostics
- FAQ
- Recommended Products
Overview
Place of Origin: |
Sweden |
Brand Name: |
ABB |
Model Number: |
AO801 3BSE020514R1 |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
5-7 days |
Payment Terms: |
T/T |
Supply Ability: |
In stock |
Specifications
|
Model: |
AO801 3BSE020514R1 |
|
Dimensions: |
9.3 x 13.5 x 6 cm |
|
Weight: |
0.24 kg |
|
Signal Specification: |
0...20 mA, 4...20 mA |
|
Number of Channels: |
8 |
|
Signal Type: |
Unipolar single ended |
|
HART Support: |
No |
|
SOE: |
No |
|
Redundancy: |
No |
|
High Integrity: |
No |
|
Intrinsic Safety: |
No |
|
Mechanics: |
S800L |
|
Resolution: |
12 bit |
|
Isolation: |
Groupwise isolated from ground |
|
Under/Over Range: |
- / +15% |
|
Output Load: |
Max 850 Ω |
|
Error: |
0.1 % |
|
Temperature Drift: |
Typ 30 ppm/°C, Max 50 ppm/°C |
|
Rise Time: |
10 µs |
|
Update Cycle Time: |
1 ms |
|
Current Limiting: |
Short circuit proof current limited output |
|
Maximum Field Cable Length: |
600 meters (656 yards) |
|
Rated Insulation Voltage: |
50 V |
|
Dielectric Test Voltage: |
500 V a.c. |
|
Power Dissipation: |
3.8 W |
|
Current Consumption +5 V Modulebus: |
70 mA |
|
Current Consumption +24 V Modulebus: |
- |
|
Current Consumption +24 V External: |
200 mA |
|
Supported Wire Size: |
Solid: 0.05-2.5 mm², 30-12 AWG; Stranded: 0.05-1.5 mm², 30-12 AWG |
|
Recommended Torque: |
0.5-0.6 Nm |
|
Stripping Length: |
6-7.5 mm, 0.24-0.30 inch |
Description
The AO801 3BSE020514R1 Analog Output Module has 8 unipolar analog output channels. The module performs selfdiagnostic cyclically. A low internal power supply sets the module in INIT state (no signal from the module).
Environment and certification
|
CE Mark: |
Yes |
|
Electrical Safety: |
EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201 |
|
Hazardous Location: |
C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 |
|
Marine Certification: |
ABS, BV, DNV, LR |
|
Operating Temperature: |
0 to +55 °C (+32 to +131 °F), approvals issued for +5 to +55 °C |
|
Storage Temperature: |
-40 to +70 °C (-40 to +158 °F) |
|
Pollution Degree: |
Degree 2, IEC 60664-1 |
|
Corrosion Protection: |
ISA-S71.04: G3 |
|
Relative Humidity: |
5 to 95 %, non-condensing |
|
Max Ambient Temperature: |
55 °C (131 °F), for vertical mounting 40 °C (104 °F) |
|
Protection Class: |
IP20 according to IEC 60529 |
|
Mechanical Operating Conditions: |
IEC/EN 61131-2 |
|
EMC: |
EN 61000-6-4 and EN 61000-6-2 |
|
Overvoltage Categories: |
IEC/EN 60664-1, EN 50178 |
|
Equipment Class: |
Class I according to IEC 61140 (earth protected) |
|
RoHS Compliance: |
EU RoHS, UAE RoHS, CN RoHS |
|
WEEE Compliance: |
DIRECTIVE/2012/19/EU |
Applications
Power plants/electric power stations: Used to regulate boiler feedwater pump frequency converters and damper actuators.
Petrochemical plants: Drive various field control valves (4...20 mA signal) from within the safety control cabinet.
Paper mills: Precisely control the headbox pressure of paper machines and the steam control valves of each drying cylinder.
Fertilizer plants/fine chemical plants: Used to control the speed of dosing pumps and the cooling water flow rate of reactors.
Metallurgical plants/steel mills: Regulate the opening of gaseous fuel valves in the continuous casting or heating furnace control system.
Features and benefits
8 channels of 0...20 mA, 4...20 mA outputs
OSP sets outputs to predetermined state upon error detection
Analog Output is to be short circuit secured to ZP or +24 V
Process and power connection via detachable connectors
Diagnostics
Front LED’s: S(tatus) (run or fault)
Status indication of supervision: Module Error, Module Warning, Channel error
FAQ
Q: What is the AO801 3BSE020514R1?
A: It is a Analog Output Module.
Q: What are the differences between AO801 and AO810?
A: AO810 (3BSE008516R1) supports both 0–20 mA and 4–20 mA current outputs and features enhanced self-diagnostic capabilities, whereas AO801 only supports 4–20 mA output.
Q: Does AO801 3BSE020514R1 support 0–10 V voltage output?
A: No. AO801 3BSE020514R1 is analog output modules only. To obtain a voltage output, an external 500 Ω precision resistor or an AO820 voltage output module is required.
Q: Does AO801 3BSE020514R1 support HART protocol?
A: No. If HART communication is needed, AO845 or AO845A modules should be used instead.
