IC694APU300 High-speed Counter module, China IC694APU300 High-speed Counter module Manufacturers, Suppliers, Factory

Overview

Place of Origin:	USA
Brand Name:	GE
Model Number:	IC694APU300
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Parameter	Value
Module Name	IC694APU300
Module Type	High-speed Counter Module
Dimensions	3.5 x 13.2 x 13.6 cm
Weight	0.3 kg
Power Consumption	250 mA (1.25 W) from 5 V bus on backplane
Output Points Powered By	User supplied 4.7–40 V DC
Maximum Count Rate	1 MHz (Duty Cycle 25%–87%)
LED Indicators	BOARD OK; CONFIG OK; Field Power OK; Input Status; Output Status
Isolation	Field to Backplane and Frame Ground: 250 V AC continuous; 1500 V AC for 1 min; Group to Group: 250 V AC continuous; 1500 V AC for 1 min
Inputs	Voltage Range: 5 V DC (TSEL jumpered to INCOM), 10–30 V DC (TSEL open)
Number of Positive Logic Inputs	12 (Single Ended) or 6 (Differential)
Input Thresholds (Von)	5 V range: 3.55 V; 10–30 V range: 8.35 V
Input Thresholds (Ion)	3.2 mA (both ranges)
Input Thresholds (Voff)	5 V range: 1.5 V; 10–30 V range: 2.4 V
Input Thresholds (Ioff)	0.8 mA (both ranges)
Survivable Peak Voltage	±500 V for 1 μs
Transient Common Mode Noise Rejection	1000 V/μs minimum
Input Impedance	Refer to section "Input Impedance" for V-I characteristics
Outputs	Voltage Range: 4.7–40 V DC at 1.5 A max resistive load; 0.5 A max pilot duty
Off-state Leakage Current	10 μA max per point
Output Voltage Drop	0.5 V max at 500 mA; 1.5 V max at 1.5 A
Inrush Current	1.6 A without ESCP tripping
CMOS Load Drive Capability	Yes
Positive Logic Outputs	4
Output Protection	Overcurrent protected (ESCP) with self-healing
Reverse Polarity Protection	Protected between OUTPWR and OUTCOM terminals

Description

The PACSystems* High-speed Counter module, IC694APU300, provides direct processing of rapid pulse signals up to 1 MHz. The module senses inputs, processes the input count information, and instantaneously controls the outputs per each counter’s configuration without needing to communicate with a central processing unit (CPU). The module can be configured to have:

• 4 identical, independent simple counters

• 2 identical, independent more complex counters

• 1 complex counter

Applications

Food and beverage packaging plants: Rotary encoder position tracking for high-speed sealing machines, labeling machines, and filling lines.

Logistics and express sorting centers: Speed measurement of automated conveyor belts and precise positioning of packages.

Wire and cable and steel mills: High-speed length counting and winding control for wires and steel plates.

Paper and printing plants: Tension control, synchronous cutting, and printing alignment for roll paper.

Automotive parts factories: Turntable indexing control and position feedback for servo mechanisms in precision assembly lines.

Tobacco processing plants: High-speed pulse acquisition for cigarette machines and synchronous filter rod cutting.

Aluminum profile and wood processing plants: Displacement monitoring for flying saws (fixed-length cutting) and material conveying.

Textile and chemical fiber plants: Spindle speed monitoring and winding displacement control for spinning machines.

Features

12 positive logic (source) inputs with input voltage range selection of either

5 V dc or 10 to 30 V dc

4 positive logic (source) outputs

Counts per timebase register for each counter

Internal module diagnostics

Removable terminal board for field wiring

Installation

1 General Installation Conditions Of Safe Use

This product is considered open type equipment that shall be installed into an enclosure that provides minimum pollution degree 2 environment as defined by IEC60664-1. Unless instruction is provided, there are no field serviceable parts. Wiring connections shall use copper wire with minimum rating of 90 degrees Celsius. Where two wires are allowed the same wire type and size shall be used.

2 Installation In Hazardous Locations

Products bearing UL and ATEX marking are suitable for use in Class I Division 2, Groups A, B, C and D, and ATEX Zone 2 hazardous locations, or non-hazardous locations. Product shall be installed in an enclosure that is only accessible with the use of a tool.

WARNING – EXPLOSION HAZARD - WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE WIRING or REPLACING MODULES, BATTERIES, BATTERY PACKS, FUSES, or ANY OTHER FIELD SERVICEABLE COMPONENT. SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY.

ATEX Zone 2

In addition to the above, the product shall be mounted in an enclosure certified for use in Zone 2, Group IIC, and rated IP54 minimum. Transient protection shall be provided at the input terminals set at a level 140% of rated. Markings as defined below.

FAQ

Q: What is the IC694APU300?
A: It is a High-speed Counter module.

Q: Is IC694APU300 new or refurbished?
A: All our products are original new with 1 year warranty.

Q:Can you ship the IC694APU300 to my country?
A: Please don't worry ,We can ship the goods to worldwide.

Q: What makes Moore’s services unique?
A: Our services combine cost-effectiveness, speed, and professional technical support, ensuring your equipment runs efficiently and reliably.

Q: What brands of spare parts do you offer?
A: We carry a broad selection of internationally trusted brands, including ABB, Siemens, Honeywell, Bentley Nevada, and many others.