IC670MDL740 Positive Output Module, China IC670MDL740 Positive Output Module Manufacturers, Suppliers, Factory

Overview

Place of Origin:	USA
Brand Name:	GE
Model Number:	IC670MDL740
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Parameter	Value
Module Name	IC670MDL740 Positive Output Module
Dimensions	5.5 x 8.6 x 8.2 cm
Weight	0.22 kg
User Input Voltage	10–30 VDC, 24 VDC nominal, 4 A maximum
Output Voltage Range	9.2–29.5 VDC
Output Current	0.5 A max per point, 4 A max per module
Outputs per Module	16
Indicators	Logic side LEDs indicate on/off status, blown fuse fault, and user supply below 9.8 VDC
Isolation	User input to logic, user input to frame ground, group to group: 250 VAC continuous / 1500 VAC for 1 min; no isolation between points in a group
Current Drawn from BIU Power Supply	111 mA maximum
Inrush Current	2 A max for 100 ms
Maximum Load Current (Resistive)	0.5 A from 10 VDC to 30 VDC
Minimum Load Current	1 mA per point
Output Voltage Drop	0.5 V maximum
Output Leakage Current	0.5 mA at 30 VDC
Response Time-On	200 µs max with 0.5 A resistive load
Response Time-Off	200 µs max with 0.5 A resistive load
Protection (Each Output)	Fuse: Metric 5 x 20 mm – 5 A, 250 V, Slow Acting, common to all outputs

Description

The 12/24 VDC Positive Output Module (IC670MDL740) provides a single group of 16 discrete outputs. The outputs are positive logic or sourcing-type outputs. They switch the loads to the positive side of the DC supply, and thus supply current to the load. The power that runs the module itself comes from the power supply in the Bus Interface Unit. An external source of DC power must be provided for the switches that power the loads. Within the module, the external power supply is connected to a 5A fuse. During operation, the module monitors this power to be sure it is above 9.8 VDC. If not, it is interpreted as a fault by the Bus Interface Unit.

Applications

Automotive manufacturing plants: Controlling solenoid valves, cylinders, small conveyor motors, and indicator lights on assembly lines.

Food and packaging industries: Driving packaging machine forks, sealing heater contactors, and sorting levers.

Water treatment facilities: Controlling the start and stop of dosing pumps and the on/off status of electric valves.

Warehouse and logistics automation: Sensor-driven actuators for sorting systems.

Textile and plastics machinery: Precisely controlling heating element drivers and mold locking devices.

Operation

After checking the Board ID and verifying that the module is receiving appropriate logic power from the Bus Interface Unit (as reflected by the state of the module’s Power LED), the Bus Interface Unit then sends output data to the module in serial format. During transmission, the module automatically loops this data back to the Bus Interface Unit for verification. Serial to parallel converters convert this data into the parallel format needed by the module. Opto-isolators isolate the module’s logic components from field outputs. Power from the external power supply is used to drive the FETs that source current to the loads.