DS200VPBLG1AEE 151X1212CC01SA01 VME backplane card

Overview

Place of Origin:	USA
Brand Name:	GE
Model Number:	DS200VPBLG1AEE 151X1212CC01SA01
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Description

DS200VPBLG1AEE 151X1212CC01SA01 is a VME backplane card developed by GE under LCI series. The VME Backplane Board (VPBL) is the VME backplane for the card cage's J2 and J3 sections. The VPBL board is multilayer, with separate analog and digital power planes. Each power connection in each slot has power distribution and bypass capacitors.

Applications

Power Energy Industry (Core Generation Control):

LS2100 Static Start-up System: Used for variable frequency speed control during the startup of large gas turbines.

Load Commutator Inverter (LCI): Serves as the core communication backplane for a 13-slot chassis in pumped storage or large motor startup scenarios.

Heavy Industry Power Distribution: Deployed in large synchronous motor drive systems in steel mills and chemical plants to ensure electrical isolation between digital and analog signal planes.

Features

1.TMR controllers receive data from triple-redundant sensors, the number of which varies depending on the system. Because one of Mark V's advantages is its scalability and adaptability, many systems are one-of-a-kind. It is designed to fit into a rack system that accepts and stores other boards. These connect to the eight VME-type connectors on the board's back half. It should be noted that this housing is a separate assembly.

2.The PCB has several vertical pin connectors, including a diagnostic 26-pin discrete cable connector. A voltage feedback scaling board sends attenuated voltage signals to the card via three 20-pin ribbon connectors. The board also has a twelve-pin Mate-n-Lock for power supply connection

3.On the board, there are three Mate-n-Lock connectors. Tachometer signals are sent to the CPU via a 12-pin terminal block. There are five jumpers and eight stab connectors on the board

4.The PCB has sixty TP test points. Spring loops provide access to both analog and digital signals. A terminal strip, seven resistor network arrays, four high-voltage electrolytic capacitors, and four LEDs round out the board's

Testpoints

Sixty spring-loop testpoints allow access to the analog and digital signals generated by the three phases of alternating current on the two sources (input power), as well as the positive and negative dc outputs. Testpoints 55 and 62 - 118 are assigned to J2 connector pins and are only for factory use.

Frequently Asked Questions

Q:What is DS200VPBLG1AEE 151X1212CC01SA01?

A: DS200VPBLG1AEE 151X1212CC01SA01 is a VME backplane card developed by GE under LCI series.

Q:How to Obtain DS200VPBLG1AEE 151X1212CC01SA01?

A: We provides DS200VPBLG1AEE as well as other turbine control products. Contact us.

Q: How is the backplane of the DS200VPBLG1AEE 151X1212CC01SA01 used?

A: The backplane is used for the J2 and J3 sections of the equipment's card cage.

Q: What is the purpose of the J2 and J3 sections on the DS200VPBLG1AEE 151X1212CC01SA01 model?

A: The J2 section on the DS200VPBLG1AEE 151X1212CC01SA01 board is used to support several boards, those being a DSPC board, up to three Gate Distribution and Status Boards, an I/O extender, and one exciter board with two spare slots available. The J3 section is typically used for external connections that are not on the board fronts due to space or other restrictions.