Siemens 6SL3244-0SA00-1AA0 ET 200S FC ICU24 Frequency Converter Control Unit
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the standard ICU24 hardware configuration and matching TM-ICU15 base.
- Select the IPM25 power rating and station power-group components separately.
- Connect motor temperature and encoder signals according to the selected control mode.
- Keep supply-group current and mounting-dependent ambient temperature within their limits.
6SL3244-0SA00-1AA0 ET 200S FC ICU24 Frequency Converter Control Unit
Standard ICU24 control unit for ET 200S FC, supporting V/f and vector control, motor temperature sensing and encoder feedback.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SL3244-0SA00-1AA0 |
| Product Type | Frequency converter control unit |
| Core Function | Motor control and station communication |
| Application | ET 200S FC with IPM25 power modules |
Motor control modes
Linear, parabolic and multi-point V/f control are complemented by vector speed and torque control with or without an encoder.
Station integration
Communication to the higher-level controller passes through the ET 200S IM 151 interface.
Motor and converter monitoring
Temperature, overload, current and voltage monitoring protect the motor and converter system.
Product Overview
6SL3244-0SA00-1AA0 provides closed-loop motor control and the communication interface for an ET 200S FC frequency converter.
The ICU24 works with an IPM25 power module and the TM-ICU15 terminal module, while its service, temperature-sensor and encoder connections support commissioning and motor supervision.
Key Functions
Motor control modes
Linear, parabolic and multi-point V/f control are complemented by vector speed and torque control with or without an encoder.
Station integration
Communication to the higher-level controller passes through the ET 200S IM 151 interface.
Motor and converter monitoring
Temperature, overload, current and voltage monitoring protect the motor and converter system.
Official Specifications
| Required terminal module | TM-ICU15, 3RK1903-3EA10 |
|---|---|
| Power-stage interface | PM-IF connection to IPM25 |
| Control modes | Linear/parabolic/multi-point V/f; FCC; vector speed and torque control with or without encoder |
| Motor temperature connection | PTC/KTY84 interface |
| Service connection | RS232 diagnostic interface |
| Parameter medium | MMC-PS slot |
| Setpoint resolution | 0.01 Hz digital and serial |
| Output-frequency resolution | 0.01 Hz digital and serial |
| Current consumption | 0.4 A typical; 0.8 A maximum |
| Mounting ambient | −10 to +60°C horizontal; −10 to +40°C vertical |
| Enclosure protection | IP20 |
| Status indicators | SF, RY and OL |
| Mounting dimensions including terminal module | 15 × 220 × 156 mm (W × H × D) |
| Approximate weight | 220 g |
Frequently Asked Questions
Which terminal module is needed beneath 6SL3244-0SA00-1AA0?
Use the TM-ICU15 terminal module with order number 3RK1903-3EA10.
Does 6SL3244-0SA00-1AA0 replace an ICU24F in a safety configuration?
The standard ICU24 cannot replace the fail-safe ICU24F.
How does 6SL3244-0SA00-1AA0 communicate with the higher-level controller?
Communication passes through the ET 200S IM 151 interface module.
Can 6SL3244-0SA00-1AA0 run vector speed control with an encoder?
The control unit supports vector speed and torque control with or without encoder feedback.
Which temperature sensors connect to 6SL3244-0SA00-1AA0?
The motor temperature connection supports PTC and KTY84 sensors.
What current should I include when sizing the supply group for 6SL3244-0SA00-1AA0?
Allow for a maximum control-unit current of 0.8 A and add the current of the other group components.
Do the SH and G1–G6 LEDs indicate safety functions on 6SL3244-0SA00-1AA0?
Those LED positions have no significance on the standard ICU24.