Siemens 6SE7090-0XX84-4HA0 SIMOVERT MASTERDRIVES LBA Local Bus Adapter
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the LBA and ADB as separate components with different roles.
- Occupy mounting position 2 first for a single adaptation board.
- Retain slot C for an encoder board.
- Follow the host-specific limits for CBP and technology-board combinations.
6SE7090-0XX84-4HA0 SIMOVERT MASTERDRIVES LBA Local Bus Adapter
An LBA local-bus adapter used with the ADB adaptation board to extend the option-board arrangement in compatible drive electronics boxes.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SE7090-0XX84-4HA0 |
| Product Type | Local-bus adapter |
| Core Function | Connection of additional drive option positions |
| Application | Compact and chassis drive electronics boxes |
Additional positions
The LBA supports the expansion arrangement for option slots D through G.
Separate ADB carrier
Miniature boards mount on the corresponding adaptation board.
Defined slot sequence
Mounting position 2 is occupied first when a single adaptation board is used.
Product Overview
6SE7090-0XX84-4HA0 provides the local-bus connection required when additional option-board positions are used in compatible SIMOVERT MASTERDRIVES compact and chassis units. It works with the corresponding ADB carrier rather than replacing that carrier.
The electronics-box arrangement assigns slots D and E to mounting position 2 and slots F and G to mounting position 3. Board selection and slot sequence depend on the host control unit and on any technology or encoder board already installed.
Key Functions
Connect the expanded option positions
The LBA and ADB arrangement enables use of the additional option positions D, E, F and G in the supported electronics box.
Retain the required board sequence
When only one adaptation board with options is installed, it occupies mounting position 2 on the right-hand side.
Coordinate communication and technology boards
With a technology board in mounting position 2, the adaptation board carrying the CBP is installed in mounting position 3.
Official Specifications
| Expanded option-slot arrangement | D and E at mounting position 2; F and G at mounting position 3 |
|---|---|
| Control-unit-side option positions | Slot A at the top and slot C at the bottom of the CU board |
| Backplane board accommodation | One CU control board and up to two ADB carrier boards |
| Option-board capacity per ADB carrier | Up to two miniature option boards on each ADB carrier |
| Mechanical retention | Snap-in engagement inside the electronics box |
| Hot-swap capability | Board insertion and removal only with the power supply disconnected |
| Net weight | 0.1 kg |
| REACH-declared substance | Lead (CAS 7439-92-1) above 0.1% by mass |
Frequently Asked Questions
Do I need a separate ADB when installing option boards through 6SE7090-0XX84-4HA0?
The expanded option arrangement requires both the LBA local-bus adapter and the corresponding ADB adaptation board.
Which option positions become available through 6SE7090-0XX84-4HA0?
The expanded compact and chassis electronics-box arrangement uses option slots D, E, F and G.
Where should I place a single option carrier when using 6SE7090-0XX84-4HA0?
A single adaptation board with optional boards must occupy right-hand mounting position 2.
How should I arrange a CBP carrier and a technology board with 6SE7090-0XX84-4HA0?
The technology board occupies mounting position 2 and the adaptation board with CBP occupies mounting position 3.
Can the encoder board be moved away from slot C when 6SE7090-0XX84-4HA0 is fitted?
The encoder board still requires slot C.
Can a CBP use either position on an ADB with 6SE7090-0XX84-4HA0 in the supported Motion Control arrangement?
The CBP can occupy the top or bottom ADB position in the specified Motion Control Performance 2, Motion Control and Vector Control arrangement.
What must happen before I open the drive to install 6SE7090-0XX84-4HA0?
Disconnect the drive supply and wait until the DC-link capacitors have completely discharged before opening the converter.