EN
Siemens Absolute Encoder Multiturn 30-bit PROFINET IO 6FX2001-5QN25
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens • Motion Control Encoder Measuring Systems
6FX2001-5QN25 Absolute Encoder Multiturn 30-bit PROFINET IO
The Siemens multiturn absolute encoder provides 30-bit feedback, two-port PROFINET IO RT/IRT communication, a 10 mm shaft and configurable position parameters for industrial motion systems.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6FX2001-5QN25 |
| Product Type | Multiturn absolute encoder with clamp flange |
| Core Function | Transmits absolute position and speed data through two-port PROFINET IO RT/IRT |
| Application or Compatible Series | PROFINET or EtherNet/IP motion systems requiring a 10 mm solid shaft and multiturn position feedback |
Exact Identification
Match 6FX2001-5QN25 character by character and confirm the complete Absolute Encoder Multiturn 30-bit PROFINET IO designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The Siemens multiturn absolute encoder provides 30-bit feedback, two-port PROFINET IO RT/IRT communication, a 10 mm shaft and configurable position parameters for industrial motion systems.
Configurable resolution provides absolute position across multiple revolutions. Two M12 ports support PROFINET IO RT/IRT operation and compatible EtherNet/IP transmission. Preset, counting direction and resolution can be parameterized for the engineered axis.
Key Functions
Multiturn Absolute Measurement
Configurable resolution provides absolute position across multiple revolutions.
Two-Port Real-Time Ethernet
Two M12 ports support PROFINET IO RT/IRT operation and compatible EtherNet/IP transmission.
Configurable Encoder Functions
Preset, counting direction and resolution can be parameterized for the engineered axis.
Official Specifications
| Operating Voltage | 10 to 30 V DC |
|---|---|
| Interface | PROFINET IO with RT/IRT |
| IRT Ports | 2 |
| Transmission Rate | 100 Mbit/s |
| Network Connections | 2 x M12, 4-pin |
| Power Connection | 1 x M12, 4-pin |
| Absolute Resolution | 30 bit |
| Resolution per Revolution | 1 to 8,192 |
| Total Resolution | 1 to 8,192 x 16,384 |
| Shaft Diameter | 10 mm |
| Shaft Length | 20 mm |
| Maximum Mechanical Speed | 6,000 rpm |
| Operating Temperature | -40 to 85 °C |
| Housing Protection | IP67 |
| Shaft-Input Protection | IP64 |
| Maximum Angular Acceleration | 100,000 rad/s² |
| Net Weight | 0.43 kg |
| Supported Encoder Profile | PNO encoder profile V4.1, classes 1 to 4 |
Frequently Asked Questions
Which network should be configured for 6FX2001-5QN25?
Use the validated PROFINET IO RT/IRT or EtherNet/IP topology with the assigned device identity and port roles.
Can the counting direction be changed on 6FX2001-5QN25?
Yes; set it in the approved encoder configuration and verify axis motion before production.
What shaft coupling is required for 6FX2001-5QN25?
Use a coupling designed for the 10 mm solid shaft and the permitted axial and radial loads.
How is 6FX2001-5QN25 powered and connected?
Provide 10 to 30 V DC through the power M12 connector and use the two separate M12 network ports.
Which resolution should be restored on 6FX2001-5QN25?
Restore the engineered singleturn and multiturn values within the published parameter ranges.
What should be saved before replacing 6FX2001-5QN25?
Record the network name, address, encoder profile, telegram, preset, counting direction and resolution.
What should be tested after installing 6FX2001-5QN25?
Verify link status, absolute position, speed feedback, rotation direction, preset function and homing behavior.
Compatibility & Ordering Notes
Compatibility Checklist
- Match the 10 mm shaft and clamp-flange mounting.
- Restore the exact PROFINET or EtherNet/IP device configuration.
- Verify the encoder profile, telegram and parameterized resolution.
