EN
Siemens 6ES7972-0BA52-0XA0 SIMATIC PROFIBUS FastConnect 90° Bus Connector without PG Socket
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Reserve space for the 90-degree cable outlet.
- Use the intended two-core PB FC installation cable.
- Select termination according to the bus-end arrangement.
- Choose another variant if a PG socket is required.
6ES7972-0BA52-0XA0 SIMATIC PROFIBUS FastConnect 90° Bus Connector without PG Socket
A 90-degree FastConnect PROFIBUS connector with switchable bus termination and no programming-device socket.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7972-0BA52-0XA0 |
| Product Type | PROFIBUS bus connector |
| Core Function | Station-to-bus cable connection |
| Application | PROFIBUS RS 485 networks |
FastConnect cable termination
Integrated insulation-displacement terminals connect two-core PB FC installation cable.
Switchable termination
An integrated resistor combination is enabled through the slide switch.
No PG socket
The connector is the version without a separate programming-device connection.
Product Overview
6ES7972-0BA52-0XA0 connects a PROFIBUS station to its RS 485 bus cable using FastConnect insulation-displacement terminals.
The right-angle cable outlet, integrated strain relief and screw locking secure the cable connection while the slide switch provides the bus-termination selection.
Key Functions
Terminate PROFIBUS installation cable
Two cable connections accept the specified two-core PB FC installation cable through the integrated insulation-displacement contacts.
Connect the network station
A nine-pin sub-D plug makes the electrical connection to the PROFIBUS device.
Set the bus end termination
The internal resistor combination is connected through the slide switch when termination is required at the bus end.
Official Specifications
| PROFIBUS DP transfer-rate range | 9.6 kbit/s–12 Mbit/s |
|---|---|
| Bus-cable connection provision | 2 connections for two-core PB FC installation cable |
| Station interface | 1 nine-pin sub-D connector |
| Cable termination technology | Integrated insulation-displacement contacts |
| Termination network | Integrated resistor combination with slide switch |
| Cable outlet angle | 90° |
| Locking mechanism | Screwed joint |
| Enclosure material | Plastic |
| Protection rating | IP20 |
| Operating ambient temperature | −25 to +60 °C |
| Storage and transport temperature | −40 to +70 °C |
| Dimensions (W × H × D) | 15.8 × 59 × 35.6 mm |
| Net weight | 36 g |
| Cable strain relief | Integrated |
| PG connection socket | Not fitted |
| Silicone content characteristic | Silicone-free |
Frequently Asked Questions
Can I connect a programming device directly through 6ES7972-0BA52-0XA0?
No, this version has no PG connection socket.
Which cable construction is intended for the FastConnect terminals of 6ES7972-0BA52-0XA0?
The integrated insulation-displacement terminals are intended for two-core PROFIBUS FastConnect installation cable.
Can 6ES7972-0BA52-0XA0 handle a 12 Mbit/s PROFIBUS DP segment?
Yes, its specified transfer-rate range extends from 9.6 kbit/s to 12 Mbit/s.
How is bus termination enabled on 6ES7972-0BA52-0XA0?
The slide switch connects the integrated terminating-resistor combination.
What clearance is needed for the cable direction at 6ES7972-0BA52-0XA0?
The connector uses a 90-degree cable outlet, so the installation must allow for that right-angle routing.
Can 6ES7972-0BA52-0XA0 operate where the cabinet ambient reaches 60 °C?
Yes, 60 °C is the upper limit of the specified −25 to +60 °C operating range.
Does 6ES7972-0BA52-0XA0 provide mechanical cable retention?
Yes, the connector includes strain relief and is secured to the device through a screwed joint.
