Siemens 6ES7953-8LG30-0AA0 SIMATIC S7 Micro Memory Card 128 KB
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the S7-300, C7 or ET 200 device memory-card requirement.
- Check that the complete load image fits in 128 KB.
- Use SIMATIC-compatible card programming hardware.
- Stop or power down the CPU and finish all write operations before removing the card.
- Ensure the stored user program matches the target system.
6ES7953-8LG30-0AA0 SIMATIC S7 Micro Memory Card 128 KB
A 128 KB SIMATIC Micro Memory Card with 3.3 V Nflash storage for compatible S7 controller installations.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7953-8LG30-0AA0 |
| Product Type | Micro Memory Card |
| Core Function | Storing controller programs and data |
| Application | Compatible S7-300, C7 and ET 200 devices |
Defined capacity
The card provides 128 KB of storage.
SIMATIC programming
Writing uses SIMATIC-compatible programming hardware and the SIMATIC file system.
Controlled replacement
The CPU must be stopped or powered down and card writes completed before removal.
Product Overview
6ES7953-8LG30-0AA0 provides program and data storage for compatible S7-300, C7 and ET 200 devices. Its 128 KB Nflash capacity and 3.3 V design identify the intended SIMATIC Micro Memory Card generation.
In an applicable S7-300 CPU31x installation, the MMC acts as load memory or a portable data medium. The card and its stored program must be compatible with the target CPU and machine configuration.
Key Functions
Retain the controller content
The Nflash medium stores the program and data for the compatible controller installation.
Provide CPU load memory
The S7-300 CPU31x arrangement uses the SIMATIC MMC as load memory or a portable data medium.
Support service programming
SIMATIC-compatible programming hardware writes the card using the SIMATIC file system.
Official Specifications
| Storage capacity | 128 KB |
|---|---|
| Memory technology | Nflash |
| Nominal card voltage | 3.3 V |
| Maximum loadable blocks | 1,024 for the 128 KB card; limited by available capacity and the target CPU |
| Erase/write limit | Up to 100,000 operations at ambient temperatures up to 60 °C |
| Data retention | At least 10 years after final programming |
| Card file system | SIMATIC-specific file system |
| Internal card identifier | Internal serial number, readable with SFC 51 (RDSYSST), SSL 011CH, index 8 |
Frequently Asked Questions
Can I write 6ES7953-8LG30-0AA0 with an ordinary PC card reader?
Writing a SIMATIC MMC requires programming hardware that supports the SIMATIC file system.
When may I remove 6ES7953-8LG30-0AA0 from an S7-300 CPU31x?
Stop or power down the CPU and ensure that no programming-device write operation is accessing the card before removal.
What can happen if a program write to 6ES7953-8LG30-0AA0 is interrupted by power loss?
An interrupted download or Write to EPROM operation can invalidate the card content and cause the CPU to request formatting.
Can 6ES7953-8LG30-0AA0 serve as CPU load memory?
The compatible S7-300 CPU31x installation can use the MMC as load memory or a portable data medium.
Is 6ES7953-8LG30-0AA0 the same card generation as the S7-1500 SMC?
The S7-300 MMC and the SIMATIC Memory Card used by the S7-1500 are different card generations.
Will a 256 KB load image fit on 6ES7953-8LG30-0AA0?
The complete stored image must fit within the card capacity of 128 KB.
Which program should be present before installing 6ES7953-8LG30-0AA0?
Use a card containing a user program appropriate for the actual CPU and machine configuration.