EN
Siemens 6ES7193-4CC20-0AA0 SIMATIC ET 200S TM-P15S23-A1 Power Terminal Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Keep the common AUX1 assignment consistent across adjacent groups.
- Select the PM-E supply rating separately.
- Use the two local auxiliary positions A4 and A8.
- Tighten the screw terminals within 0.4–0.7 N·m.
6ES7193-4CC20-0AA0 SIMATIC ET 200S TM-P15S23-A1 Power Terminal Module
A screw-terminal power base with local AUX1 access and an auxiliary bus that remains continuous from the preceding group.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7193-4CC20-0AA0 |
| Product Type | Power module terminal base |
| Core Function | Power-group infeed with auxiliary continuity |
| Application | ET 200S PM-E power modules |
Continuous auxiliary rail
The AUX1 bus is connected electrically to the potential group on the left.
Local AUX1 access
Terminals A4 and A8 expose the continuous auxiliary potential.
Load-group boundary
The inserted power module begins a new supply group for the following electronic modules.
Product Overview
6ES7193-4CC20-0AA0 is the TM-P15S23-A1 screw-terminal base for an ET 200S power module.
It starts a new load-potential group while keeping AUX1 continuous, allowing a shared auxiliary potential to pass across the boundary between power groups.
Key Functions
Feed a new electronic-module supply group
The power buses are supplied through the power module and continue to downstream electronic-module bases until the next TM-P module.
Carry AUX1 across the group boundary
The A1 auxiliary rail remains electrically linked to the preceding potential group.
Expose the common auxiliary potential
A4 and A8 provide screw-terminal access for the planned protective conductor or other auxiliary potential.
Official Specifications
| Connection technology | Screw terminals |
|---|---|
| Terminal arrangement | 2 × 3 connections |
| AUX1 connection positions | A4 and A8 |
| Auxiliary bus routing | Continuous to the potential group on the left |
| Bare solid and flexible conductor range | 0.14–2.5 mm² |
| Flexible conductor range with ferrule | 0.14–1.5 mm² |
| Wire stripping length | 11 mm |
| Conductors per terminal | 1; alternatively 2 totaling up to 1.5 mm² in a shared ferrule |
| Maximum wire insulation diameter | 3.1 mm at 1.5 mm²; 3.8 mm at 2.5 mm² |
| Terminal tightening torque | 0.4–0.7 N·m |
| Dimensions (W × H × D) | 15 × 132 × 43 mm |
| Approximate module weight | 65 g |
Frequently Asked Questions
Will 6ES7193-4CC20-0AA0 isolate AUX1 when a new load-voltage group begins?
No, the load group can begin at this base while AUX1 remains continuous to the group on the left.
Can I use 6ES7193-4CC20-0AA0 when two neighboring load groups need the same auxiliary potential?
Yes, its continuous AUX1 bus supports the shared auxiliary connection across the group boundary.
Which local connections expose AUX1 on 6ES7193-4CC20-0AA0?
Terminals A4 and A8 are connected to the auxiliary bus.
Is 6ES7193-4CC20-0AA0 a suitable screw base for PM-E DC24V 6ES7138-4CA01-0AA0?
Yes, the TM-P15S23-A1 is one of the compatible screw-terminal choices for that power module.
Do I need ferrules for bare flexible conductors on 6ES7193-4CC20-0AA0?
No, bare flexible conductors from 0.14 to 2.5 mm² can be connected without ferrules.
What is the correct preparation length for field wiring on 6ES7193-4CC20-0AA0?
Remove 11 mm of insulation before inserting each conductor and tightening the screw terminal.
Does 6ES7193-4CC20-0AA0 include the PM-E electronics that monitor the load supply?
No, this part is the terminal base and the required PM-E power module is a separate component.
