Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7151 1ba00 0ab0 et 200s im151 1 high feature profibus interface-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7151-1BA00-0AB0 ET 200S IM151-1 High Feature PROFIBUS Interface

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC ET 200S

6ES7151-1BA00-0AB0 ET 200S IM151-1 High Feature PROFIBUS Interface

IM151-1 High Feature connects an ET 200S station to PROFIBUS DP, supporting up to 63 modules, 244 bytes each of input and output data and isochronous operation.

At a Glance

Brand Siemens
Model 6ES7151-1BA00-0AB0
Product Type Station interface module
Core Function PROFIBUS coupling of distributed I/O
Application ET 200S modular stations

High Feature station

The interface supports up to 63 connected ET 200S modules.

Large process-data area

244 input bytes and 244 output bytes are available.

Isochronous operation

Isochronous mode is supported from a PROFIBUS rate of 1.5 Mbit/s.

Product Overview

6ES7151-1BA00-0AB0 is the IM151-1 High Feature interface for modular ET 200S stations on PROFIBUS DP. A nine-pin Sub-D socket connects the station to the bus at rates up to 12 Mbit/s.

The interface supports SYNC, FREEZE and direct slave-to-slave data exchange, together with alarms and diagnostics, and includes the station terminating module.

Ordering focus: Select the High Feature interface for the required station size, process-data volume and PROFIBUS timing functions.
Key Functions

Extended station capacity

The interface accommodates up to 63 modules and provides independent 244-byte input and output address areas.

Coordinated PROFIBUS operation

Isochronous operation from 1.5 Mbit/s, SYNC, FREEZE and direct data exchange support coordinated station operation.

Station fault indication

BF, SF and ON LEDs provide bus-fault, group-fault and supply indications, while alarm and diagnostic functions communicate station conditions.

Official Specifications
Maximum station expansion 63 connected modules
Station process-data capacity 244 input bytes and 244 output bytes
Maximum transmission rate 12 Mbit/s
Supported PROFIBUS rates 9.6, 19.2, 45.45, 93.75, 187.5 and 500 kbit/s; 1.5, 3, 6 and 12 Mbit/s
Bus connection 9-pin Sub-D socket, RS485
Isochronous-mode minimum bus rate 1.5 Mbit/s
Supply interruption buffering 20 ms
Maximum 1L+ current 200 mA
Typical power loss 3.3 W
Maximum interface output current 80 mA
Status indicators Red BF, red SF and green ON
Isolation test voltage 500 V DC
Dimensions (W × H × D) 45 × 119.5 × 75 mm
Approximate weight 150 g
Frequently Asked Questions

Can I use 6ES7151-1BA00-0AB0 on a PROFINET IO network?

The interface supports PROFIBUS DP through RS485 and does not support PROFINET IO.

Will isochronous mode work at 500 kbit/s with 6ES7151-1BA00-0AB0?

Isochronous operation requires a PROFIBUS transmission rate of at least 1.5 Mbit/s.

Does the 244-byte capacity of 6ES7151-1BA00-0AB0 have to be shared between inputs and outputs?

The station provides 244 bytes for inputs and a separate 244 bytes for outputs.

Can 6ES7151-1BA00-0AB0 exchange data directly with another PROFIBUS slave?

The interface supports direct slave-to-slave data exchange.

Is a station terminating module supplied with 6ES7151-1BA00-0AB0?

The interface is supplied with the ET 200S terminating module.

What happens during a brief supply interruption to 6ES7151-1BA00-0AB0?

The interface provides a specified mains or voltage-failure buffering time of 20 ms.

Which indications should I inspect when commissioning 6ES7151-1BA00-0AB0?

The red BF and SF LEDs indicate bus and group faults, while the green ON LED monitors the supply.

Compatibility & Ordering Notes
Before ordering 6ES7151-1BA00-0AB0: Match the PROFIBUS High Feature interface to the ET 200S station, the total I/O address allocation and any required isochronous timing.

Compatibility Checklist for 6ES7151-1BA00-0AB0

  • Keep the station within 63 modules and the independent 244-byte address limits.
  • Use a nine-pin Sub-D PROFIBUS connection.
  • Select at least 1.5 Mbit/s when using isochronous mode.
  • Fit the supplied station terminating module and configure alarms and diagnostics as required.
Hot Selling Models
048-503 08271178 HLD 110-500/42
LEV200H5ANA
SZ2500.110
6ES7132-0BH01-0XB0 6ES7193-0CA20-0XA0
6ES7136-6RA00-0BF0
VL18-3F3240 6013548 DC10-30V
MA100
RJ45S 845-10M U-34772
3RT2026-1NB30
3RA1110-1JA16-1BB4
WAGO 787-2801
LC1D25BD
E1YM400VS10 1340405
6502903016 KIB-M12PS/002-KL2V
NCB8-18GM50-E2-V1

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.