Siemens 6ES7134-4GB00-0AB0 ET 200S Two-Wire Current Input Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Connect two-wire 4–20 mA transmitters and observe the maximum 750 Ω burden.
- Use the transmitter supply associated with the ET 200S power module.
- Set 50 or 60 Hz rejection and smoothing to suit the site and process response.
- Keep shielded input cables within 200 m.
6ES7134-4GB00-0AB0 ET 200S Two-Wire Current Input Module
Two-channel 4–20 mA input module with 13-bit resolution, short-circuit-proof transmitter supply and wire-break diagnostics.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7134-4GB00-0AB0 |
| Product Type | 2 AI Standard I-2DMU electronics module |
| Core Function | Acquisition of two-wire transmitter signals |
| Application | ET 200S 4–20 mA process loops |
Powered process loops
The transmitter supply is present and short-circuit proof for the connected two-wire sensors.
Filtered current acquisition
13-bit conversion, 50/60 Hz rejection and four smoothing stages support process-signal acquisition.
Loop fault detection
Wire break and overflow or underflow diagnostics help distinguish loop faults from valid process readings.
Product Overview
6ES7134-4GB00-0AB0 acquires two 4–20 mA signals from two-wire transmitters through an ET 200S station.
The module supplies the transmitters and provides configurable smoothing, interference suppression and group-fault indication in a 15 mm electronics assembly.
Key Functions
Powered process loops
The transmitter supply is present and short-circuit proof for the connected two-wire sensors.
Filtered current acquisition
13-bit conversion, 50/60 Hz rejection and four smoothing stages support process-signal acquisition.
Loop fault detection
Wire break and overflow or underflow diagnostics help distinguish loop faults from valid process readings.
Official Specifications
| Load Supply | 24 V DC from the power module |
|---|---|
| Maximum Supply Consumption | 80 mA from L+ without load; 10 mA from the 3.3 V backplane |
| Typical Power Loss | 0.6 W |
| Input Address Space | 4 bytes maximum |
| Input Range and Resistance | 4–20 mA on 50 Ω |
| Resolution | 13 bits |
| Maximum Two-Wire Transmitter Burden | 750 Ω |
| Transmitter Supply Destruction Limit | 35 mA per channel |
| Input Current Destruction Limit | 40 mA |
| Integration Time | 16.7 or 20 ms |
| Per-Channel Conversion Time | 55 or 65 ms |
| Interference Rejection | 50 or 60 Hz |
| Digital Smoothing | None, low, medium and high; 1, 4, 32 and 64 cycle-time factors |
| Current Error Limits | ±0.4% at 25 °C; ±0.6% across the operating temperature range |
| Maximum Shielded Cable | 200 m |
| Isolation Test Voltage | 500 V DC |
| Dimensions and Approximate Weight | 15 × 81 × 52 mm; 40 g |
Frequently Asked Questions
Can 6ES7134-4GB00-0AB0 read a 0–10 V sensor?
The module is intended for 4–20 mA current signals from two-wire transmitters.
Does 6ES7134-4GB00-0AB0 provide power to the transmitters?
A short-circuit-proof transmitter supply is integrated.
What transmitter burden can I use with 6ES7134-4GB00-0AB0?
The maximum specified burden for a two-wire transmitter is 750 Ω.
Can 6ES7134-4GB00-0AB0 detect a broken process loop?
Wire-break diagnostics are provided together with group-error and range overflow or underflow diagnostics.
How much input address space is needed for 6ES7134-4GB00-0AB0?
The module requires up to four input bytes.
How can I reduce noise in the readings from 6ES7134-4GB00-0AB0?
Select the appropriate 50 or 60 Hz interference rejection and one of the four digital smoothing stages.
Are the two measurement inputs on 6ES7134-4GB00-0AB0 isolated from one another?
The channels are not isolated from each other or from L+, but isolation is provided from the backplane bus.