Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es5460 4ua13 s5 460 analog input module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC S5 6ES5460-4UA13 460 Analog Input Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMATIC S5-135U/155U

6ES5460-4UA13 460 Floating Eight-Channel Analog Input Module

Siemens 6ES5460-4UA13 is a SIMATIC S5-135U/155U floating eight-channel analog input module that uses plug-in measuring-range submodules for voltage, current and resistance-sensor applications.

At a Glance

Brand Siemens
Model 6ES5460-4UA13
Product Type Floating eight-channel analog input module
Core Function Acquires analog process signals through selectable measuring-range submodules
Application or Compatible Series SIMATIC S5-135U and S5-155U systems

Range Submodules

Identify every installed measuring-range submodule and reproduce its channel position.

Acquisition Settings

Record line-frequency selection, scan mode, gain, compensation and wire-break settings.

Migration Planning

Compare signal type and wiring with the approved Siemens adapter or replacement module before conversion.

Product Overview

Siemens 6ES5460-4UA13 is a SIMATIC S5-135U/155U floating eight-channel analog input module that uses plug-in measuring-range submodules for voltage, current and resistance-sensor applications.

Plug-in range submodules adapt the inputs for voltage, current, two-wire or four-wire transmitters and resistance sensors. The analog input design supports isolated process-signal acquisition in S5-135U and S5-155U racks. Line-frequency integration, single or cyclic scanning, gain and wire-break monitoring can be set for the application.

Ordering focus: confirm the full article number, S5 rack type, every measuring-range submodule, channel wiring, line frequency, scan mode, gain, compensation, wire-break monitoring and migration adapter if used.
Key Functions

Selectable Measurement Types

Plug-in range submodules adapt the inputs for voltage, current, two-wire or four-wire transmitters and resistance sensors.

Floating Channel Design

The analog input design supports isolated process-signal acquisition in S5-135U and S5-155U racks.

Configurable Conversion

Line-frequency integration, single or cyclic scanning, gain and wire-break monitoring can be set for the application.

Official Specifications
Scanning Hardware Relay multiplexer
Cycle Time for Eight Inputs at 50 Hz 0.48 s
Integration Time at 50 Hz 20 ms
Integration Time at 60 Hz 16.67 ms
Maximum Shielded Cable Length Less than 200 m
Rack Space Requirement 1 slot
Maximum Input Voltage 18 V
Selectable Scan Modes Single or cyclic scanning
Selectable Line-Frequency Rejection 50 Hz or 60 Hz
Selectable Gain Modes Normal x1 or special x4
Data Representation Two’s complement
Wire-Break Monitoring Configurable for channel groups 0 to 3 and 4 to 7
Current Measuring Range 0 to 20 mA or 4 to 20 mA with the applicable range submodule
Current Overload Range 0 to 40 mA or 4 to 40 mA
Current-Range Scaling 0 mA = 0 units; 4 mA = 512 units; 20 mA = 2,048 units
S7-1500 Voltage/Resistance Adapter 6EZ2041-8UG11-0AE0
S7-1500 Two-Wire Current Adapter 6EZ2041-8UG11-2AE0
S7-1500 Four-Wire Current Adapter 6EZ2041-8UG11-3AE0
Frequently Asked Questions

Which measuring ranges can I use with 6ES5460-4UA13?

The available voltage, current and resistance ranges depend on the plug-in measuring-range submodule fitted to each channel.

What should I record before replacing 6ES5460-4UA13?

Record every range submodule, channel wire, polarity, shield, gain, scan and monitoring setting.

Can 6ES5460-4UA13 scan all eight inputs cyclically?

Yes, the module can be set for cyclic scanning and completes an eight-input cycle in 0.48 seconds at 50 hertz.

How should I set line-frequency rejection on 6ES5460-4UA13?

Select 50 or 60 hertz to match the local mains frequency and required integration time.

What should I check if 6ES5460-4UA13 reports a broken wire?

Inspect the affected channel group, field cable, transmitter supply, terminals and the configured monitoring switch.

Can 6ES5460-4UA13 be migrated to newer Siemens I/O?

Yes, Siemens lists signal-specific adapters and S7-1500 or ET 200SP modules, but the exact range submodule and wiring must be matched.

Which data format should my program expect from 6ES5460-4UA13?

Interpret converted values in the configured two’s-complement representation and apply the selected range scaling.

Compatibility & Ordering Notes
Before ordering 6ES5460-4UA13: confirm the full article number, S5 rack type, every measuring-range submodule, channel wiring, line frequency, scan mode, gain, compensation, wire-break monitoring and migration adapter if used.

Compatibility Checklist

  • Inventory the fitted measuring-range submodule in each channel position before ordering a replacement.
  • Preserve the S5 rack slot, shield routing, transmitter supplies and acquisition switch settings.
  • For migration, select the Siemens adapter and successor I/O according to the actual voltage, current or resistance signal type.
Hot Selling Models
VS-PNRJ45-PNRJ45-93B-0.5
L7A6-AN
1957620000 PT6
OP-87775
475650
PSSuES4DID
3RT2017-1AP01 3RH2911-1HA22 3RT2916-1BD00
3RV1011-1KA10
CPV14-M1H-5JS-1/8
51540
ABB S202P-K1 2CDS282001R0217
3VA9221-0WF30
ABB CRM4LS 1SVR405651R3100
NRB4-12GS40-E2-V1
3RT1024-1BB40 3RH1921-1FA22

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.