Siemens 3UF7011-1AU00-2 SIMOCODE pro V PN GP Motor Management Basic Unit

Overview

SIEMENS SIMOCODE pro 3UF7

3UF7011-1AU00-2 SIMOCODE pro V PN GP Motor Management Basic Unit

110–240 V AC/DC General Performance basic unit with one RJ45 PROFINET connection, four binary inputs, three relay outputs and a thermistor input.

At a Glance

Brand	Siemens
Model	3UF7011-1AU00-2
Product Type	SIMOCODE pro V PN GP basic unit
Core Function	Motor protection and starter control
Application	PROFINET motor-feeder control systems

Single network port

One Ethernet port distinguishes the -2 version from the two-port GP version.

Motor feeder control

Configure direct-on-line, reversing or star-delta starter functions.

Modular system

Combine the basic unit with current measurement and one optional expansion module.

Product Overview

3UF7011-1AU00-2 provides SIMOCODE pro V PN GP motor management over PROFINET in the 110–240 V AC/DC supply version, with one Ethernet connection.

The basic unit combines freely assignable binary inputs and monostable relay outputs with a thermistor connection, and works with a current-measuring module for motor-feeder protection and control.

Ordering focus: Match the 110–240 V AC/DC control supply, single-port network layout and current-measuring module, then select the one permitted expansion module for the feeder.

Key Functions

Starter control

Supported control functions include direct-on-line, reversing and star-delta starters, as well as circuit-breaker and soft-starter control.

Networked motor management

The PROFINET interface exchanges motor-feeder information with the control system, with OPC UA server and web-server functions available.

Motor temperature and local signals

A binary PTC thermistor input and four 24 V binary inputs complement three freely assignable monostable relay outputs.

Official Specifications

Rated control supply	110–240 V AC/DC; 50/60 Hz for AC
Supply operating range	0.85–1.1 × Us for startup and operation
Ethernet connection	1 RJ45 port; 100 Mbit/s
Binary process inputs	4; common reference potential; 24 V DC
Relay outputs	3 monostable normally open outputs
Relay contact grouping	2 outputs share a common potential; 1 separate output
Maximum binary-input cable length	300 m single length
Thermistor sensor type	Binary PTC
Maximum thermistor cold resistance	1.5 kΩ total
Thermistor trip resistance	3.4–3.8 kΩ
Thermistor reset resistance	1.5–1.65 kΩ
Sensor short-circuit threshold	Below 9 Ω
Thermistor cable limits	250 m at 2.5 mm²; 150 m at 1.5 mm²; 50 m at 0.5 mm²
Relay switching capacity	AC-15: 3 A at 230 V AC; DC-13: 2 A at 24 V DC
Rated uninterrupted relay current	5 A; 6 A at maximum +50 °C
Rated insulation voltage	300 V at pollution degree 3
Rated impulse withstand voltage	4 kV
Typical power-failure backup	20 ms

Official source:Siemens product manual and technical specifications

Frequently Asked Questions

Can I continue a PROFINET line through 3UF7011-1AU00-2?

The single-port version has only one RJ45 connection, so line continuation requires suitable external network equipment.

Does 3UF7011-1AU00-2 support Motor feeder control for mobile equipment?

MRP is not supported by the single-port PN GP version.

Which starter functions can I configure with 3UF7011-1AU00-2?

The GP basic unit supports direct-on-line, reversing and star-delta starters plus circuit-breaker and soft-starter control.

Do I need a current-measuring module with 3UF7011-1AU00-2?

The GP basic unit is used in combination with a current-measuring module and an optional operator panel.

How many expansion modules can I add to 3UF7011-1AU00-2?

One expansion module can add digital signals, temperature sensing or residual-current detection.

Can I connect a PTC motor sensor to 3UF7011-1AU00-2?

A binary PTC thermistor input is provided for motor-temperature protection.

Which software can I use to parameterize 3UF7011-1AU00-2?

SIMOCODE ES in the TIA Portal supports parameterization through the system interface using a suitable PC cable.

Compatibility & Ordering Notes

Before ordering 3UF7011-1AU00-2: Choose this single-port GP version for the required 110–240 V AC/DC control supply and starter function, and include the matching current-measuring module and connection cable.

Compatibility Checklist for 3UF7011-1AU00-2

• Keep the -2 single-port version distinct from the -1 two-port version and the -0 High Performance unit.
• Plan the network without relying on MRP or an integrated second Ethernet port.
• Select only one supported GP expansion module for the required additional function.
• Match the current-measuring range and SIMOCODE ES parameter set to the motor and feeder.

Hot Selling Models