Siemens 3RW5950-0CS00 SIRIUS 3RW5 PROFINET Standard Communication Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Select the matching 3RW5 base unit and Standard communication-module configuration or GSDML.
- Provide a network topology suitable for the single RJ45 connection.
- Observe the base-unit derating above forty degrees Celsius even within the communication module’s ambient range.
- Disconnect the starter main and control supplies before connection work, and stop the motor before restoring factory settings.
3RW5950-0CS00 SIRIUS 3RW5 PROFINET Standard Communication Module
PROFINET Standard communication module with one RJ45 fieldbus interface, a two-millisecond minimum update time and I&M identification data.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 3RW5950-0CS00 |
| Product Type | Soft-starter communication module |
| Core Function | PROFINET control, monitoring and diagnostics |
| Application | Compatible SIRIUS 3RW50, 3RW51, 3RW52 and 3RW55 starters |
PROFINET IO integration
The fieldbus connection carries controller commands, status and diagnostic information for the soft starter.
Engineering access
A controller connection and a SIRIUS Soft Starter ES Premium or Professional engineering connection can operate simultaneously.
Device identification and service
I&M data and fieldbus firmware updating support identification and maintenance.
Product Overview
3RW5950-0CS00 connects a compatible SIRIUS 3RW5 soft starter to a PROFINET IO control system.
The Standard communication design provides cyclic control and diagnostics, fieldbus firmware updating and engineering access through its single Ethernet connection.
Key Functions
PROFINET IO integration
The fieldbus connection carries controller commands, status and diagnostic information for the soft starter.
Engineering access
A controller connection and a SIRIUS Soft Starter ES Premium or Professional engineering connection can operate simultaneously.
Device identification and service
I&M data and fieldbus firmware updating support identification and maintenance.
Official Specifications
| Ethernet fieldbus connection | 1 RJ45 port; switched Ethernet at 100 Mbit/s, full duplex |
|---|---|
| Minimum update time | 2 ms |
| Network services | Ping, ARP and LLDP; port diagnostics |
| Identification data | I&M 0 to I&M 3 |
| Simultaneous access connections | 1 programmable controller and 1 SIRIUS Soft Starter ES Premium / Professional application |
| Operating ambient | −25 to +60°C |
| Storage and transport ambient | −40 to +80°C |
| Maximum installation altitude | 5000 m |
| Mounting | Screw fixing; any mounting position |
| Front protection | IP20; finger-safe for vertical contact from the front |
| Operating environmental classes | IEC 60721: 3K6, 3C3, 3S2 and 3M6 |
| Dimensions | 28 × 126 × 82 mm (W × H × D) |
| Approximate unpackaged weight | 0.1 kg |
Frequently Asked Questions
Can I daisy-chain two network cables directly through 3RW5950-0CS00?
The Standard module has one RJ45 fieldbus port and does not include the two-port switch provided by the High Feature design.
Can I access a web server or OPC UA server through 3RW5950-0CS00?
The Standard communication module does not provide a web server or an OPC UA server.
Which socket should the COM connecting cable use when 3RW5950-0CS00 is connected to a 3RW50 starter?
Connect the COM cable to the module’s front plug-in connection because the rear plug-in connection is not suitable for that cable.
Which SIRIUS Soft Starter ES edition provides network engineering access through 3RW5950-0CS00?
Use the Premium or Professional edition for access through the communication module.
Can I use 3RW5950-0CS00 as a participant providing MRP ring redundancy?
The Standard communication module does not support the Media Redundancy Protocol.
What does a factory reset from the controller configuration software change on 3RW5950-0CS00?
That reset procedure resets only the communication parameters of the module.
Can I configure a quarter-millisecond update time for 3RW5950-0CS00?
The minimum update time of the Standard communication module is two milliseconds.