EN
Pepperl+Fuchs IC-KP2-1HB17-2V1D IDENTControl RFID Evaluation Unit 1HB17-2V1D
Manufacturer: Pepperl+Fuchs
Condition: Brand New
Lead Time: In Stock
Origin: Singapore
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Pepperl+Fuchs • IDENTControl Compact
1HB17-2V1D IC-KP2-1HB17-2V1D IDENTControl RFID Evaluation Unit
The Pepperl+Fuchs IC-KP2-1HB17-2V1D IDENTControl Compact evaluation unit connects one RFID read/write head to industrial Ethernet and supports PROFINET IO, EtherNet/IP, MODBUS TCP and TCP/IP communication.
At a Glance
| Brand | Pepperl+Fuchs |
|---|---|
| Model | 1HB17-2V1D |
| Product Type | Ethernet RFID control interface for one read/write head |
| Core Function | Links an industrial controller to one RFID read/write head over Ethernet |
| Application or Compatible Series | Industrial identification systems using TCP/IP, PROFINET IO, EtherNet/IP or MODBUS TCP |
Exact Identification
Match 1HB17-2V1D character by character and confirm the complete IC-KP2-1HB17-2V1D IDENTControl RFID Evaluation Unit designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The Pepperl+Fuchs IC-KP2-1HB17-2V1D IDENTControl Compact evaluation unit connects one RFID read/write head to industrial Ethernet and supports PROFINET IO, EtherNet/IP, MODBUS TCP and TCP/IP communication.
Two switched Ethernet ports support common industrial control and TCP/IP communication protocols. One compatible read/write head can be powered, controlled and diagnosed through the evaluation unit. The compact powder-coated aluminum enclosure provides IP67 protection and M12 connections.
Key Functions
Multi-Protocol Ethernet
Two switched Ethernet ports support common industrial control and TCP/IP communication protocols.
Single-Head RFID Control
One compatible read/write head can be powered, controlled and diagnosed through the evaluation unit.
Field-Mounted Housing
The compact powder-coated aluminum enclosure provides IP67 protection and M12 connections.
Official Specifications
| Read/Write Head Capacity | 1 maximum |
|---|---|
| Ethernet Interfaces | 2 with integrated switch |
| Supported Protocols | SMTP, HTTP, TCP/IP port 10000, MODBUS TCP, EtherNet/IP and PROFINET IO |
| Ethernet Data Rates | 10 or 100 Mbit/s |
| Rated Operating Voltage | 20 to 30 V DC PELV |
| Maximum Supply Ripple | 10% at 30 V DC |
| Maximum Current Consumption | 2 A including read/write head |
| Power Consumption | 3.5 W without read/write head |
| Electrical Isolation | Basic insulation; 50 V rms rated insulation voltage |
| Operating Temperature | -25 to 70 °C |
| Storage Temperature | -40 to 85 °C |
| Maximum Relative Humidity | 96% |
| Degree of Protection | IP67 |
| Connections | M12 for head, power and Ethernet; M4 protective earth |
| Housing Material | Powder-coated aluminum |
| Dimensions | 42 x 62 x 137 mm |
| Approximate Mass | 300 g |
| MTBF | 70 years at 40 °C |
Frequently Asked Questions
Which RFID heads can be paired with 1HB17-2V1D?
Select one compatible IDENTControl read/write head for the required frequency, tag technology and reading distance.
Which controller protocols are available on 1HB17-2V1D?
Choose PROFINET IO, EtherNet/IP, MODBUS TCP or the supported TCP/IP services to match the automation system.
Can both Ethernet ports on 1HB17-2V1D be used in line topology?
Yes; the integrated two-port switch supports network loop-through when the topology and controller project are configured accordingly.
How should the enclosure of 1HB17-2V1D be grounded?
Bond the M4 protective-earth point to the machine ground with a low-impedance connection.
What power supply is required for 1HB17-2V1D?
Provide a PELV source within the specified DC range and allow for the connected read/write head load.
What must be recorded before replacing 1HB17-2V1D?
Capture the network address, protocol configuration, controller mapping, head type, M12 cable labels and rotary-switch position.
What should be tested after commissioning 1HB17-2V1D?
Verify network communication, head detection, tag reading and writing, status LEDs, grounding and operation across the required machine cycle.
Compatibility & Ordering Notes
Compatibility Checklist
- Use one approved IDENTControl read/write head for the required RFID technology.
- Match the controller protocol, device identity and network configuration.
- Preserve all M12 cable assignments, protective earth and PELV supply sizing.
