IC697CPM915 Central Processing Unit

Overview

Place of Origin:	USA
Brand Name:	GE
Model Number:	IC697CPM915
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Description

The GE Fanuc IC697CPM915 module is a single-slot programmable CPU module. The IC697CPM915 module can be configured by using Windows or MS-DOS based software for the control of material handling systems, machines, and processes. The CPU programming is performed over Ethernet or through the SNP port. Programmer connections through the Ethernet requires the installation of an optional Ethernet module. The IC697CPM915 module communicates with option modules and with I/Os over the rack backplane by using the VME C.1 standard format. The IC697CPM915 is compatible with the IC697CHS750, IC697CHS782, IC697CHS783, IC697CHS790, and the IC697CHS791 racks. The IC697CPM915 module must only be installed in slot 1 of the rack. The operation of the IC697CPM915 module is controlled either by the RUN/STOP switch or remotely through a programmer which is attached to the RS-422/RS-485 serial port on the CPU module.

Applications

Power plants: Responsible for turbine monitoring, auxiliary equipment management, and power distribution logic within a distributed control system (DCS).

Automotive manufacturing plants: Coordinate large painting lines, robotic body welding workstations, and complex material handling systems.

Food processing and process industries: Handle production processes requiring precise analog quantity control (such as temperature, pressure, and flow rate), including refining, mixing, and canning.

Features

Single slot CPU

Provides 1 Mbyte of battery-backed memory in the same slot

Supports floating point calculations

12K inputs and outputs (any mix)

Up to 8K analog I/O

0.4 microseconds per boolean function

32 MHz, 80486DX microprocessor

Supports IC660/IC661 and IC697 I/O

Programmed by MS-DOS or Windows software products running on Windows 95 or Windows NT over Ethernet TCP/IP or through the SNP port

Configurable data and program memory

Battery-backed calendar clock

Three position operation mode switch

Password controlled access

Remote programmer keyswitch memory protection

Four status LEDs

Software configuration (No DIP switches or jumpers)

Reference information inside front door

In-system upgradable firmware

Functions

The IC697CPM915 Central Processing Unit (CPU) is a single slot programmable controller CPU which allows floating point calculations. The CPM915 is programmed and configured by MS-DOS or Windows based programming software to perform real time control of machines, processes and material handling systems. It communicates with I/O and smart option modules over the rack mounted backplane (IC697CHS750, 782, 783, 790, 791) by way of the VME C.1 Standard format.

Supported option modules include all IC697 LAN interface modules, several Coprocessor modules, Bus Controller for IC660/IC661 I/O, Communications mod compatible computer to the serial port of the module and running the Loader software included with the firmware floppy disk.

Installation

It is the responsibility of the OEM, system integrator, or end user to properly install the PLC equipment for safe and reliable operation. Product manuals provide detailed information about installation, startup, and proper use of the PLC equipment. The installation manual, shipped with your PLC programming software, describes how to properly install the equipment. If the PLC installation must comply with supported standards, such as FCC or CE Directives, please refer to the Installation Requirements for Conformance to Standards, shipped with the PLC programming software, for additional guidelines.

Installation should not be attempted without referring to the applicable programmable controller hardware installation manual.

Connect the battery to either of the battery connectors on the module (see Figure 2).

Put the toggle switch in the STOP position.

Put the keyswitch in Memory Protection OFF position.

Make sure that rack power is off.

Install the CPM 915 module in slot 1 of rack 0.

Turn on power.

FAQ

Q: What is the IC697CPM915?
A: It is a Central Processing Unit.

Q: How many days the IC697CPM915 will arrive my hands if I place the order now?
A: As soon as we receive the payment, I will ship the products immediately.
It usually take 3-5 days from China to your hands.

Q: How long is the warranty period of IC697CPM915?
A: We offer a standard one-year warranty for all new and original products.

Q: Do you offer any discounts?
A: Yes! For discounts on IC697CPM915, please contact John for the best offer.

Q:What payment mothod we used?
A:We usually use T/T (Telegraphic Transfer),and we can received with in 1-2days.