TP-LINK TL-FC311A-3 Gigabit Single-Mode Single-Fiber Media Converter
Manufacturer: TP-LINK
Condition: Brand New
Lead Time: In Stock
Origin: China
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Pair TL-FC311A-3 with TL-FC311B-3.
- Use a single 9/125 μm single-mode fiber with compatible SC connections.
- Keep the link within the 3 km maximum distance.
- Use Category 5e or better Ethernet cable and the specified DC adapter.
- Check PWR and both Link/Act indicators after connection.
- Keep temperature and humidity within the stated non-condensing limits.
TL-FC311A-3 Gigabit Single-Mode Single-Fiber Media Converter
An A-end Gigabit media converter with one SC fiber port, one RJ45 port and a maximum 3 km single-mode fiber link when paired with the matching B-end unit.
At a Glance
| Brand | TP-LINK |
|---|---|
| Model | TL-FC311A-3 |
| Product Type | WDM Ethernet fiber media converter |
| Core Function | Converts copper Ethernet and single-fiber optical links |
| Application | Building and site Ethernet links over single-mode fiber |
Single-fiber transmission
WDM separates transmit and receive wavelengths on one single-mode fiber.
Matched A/B endpoints
Use the matching TL-FC311B-3 at the remote end of the 3 km link.
Copper and fiber status
Power and Link/Act indicators support connection checks.
Product Overview
TL-FC311A-3 links copper Ethernet equipment through a single-mode, single-fiber optical connection using wavelength-division multiplexing.
The A-end unit transmits at 1550 nm and receives at 1310 nm, with a matching B-end converter required at the opposite end; the compact enclosure provides an SC optical interface and an adaptive Gigabit RJ45 interface.
Key Functions
Single-fiber optical transport
The WDM optical link uses one 9/125 μm single-mode fiber with different transmit and receive wavelengths.
Copper Ethernet conversion
An adaptive RJ45 port connects 100 or 1000 Mbit/s Ethernet equipment using Category 5e or better UTP or STP cable.
Connection and traffic indication
The PWR indicator shows power status, while the optical and electrical Link/Act indicators distinguish link establishment from data activity.
Official Specifications
| Copper interface | One 100/1000 Mbit/s adaptive RJ45 port |
|---|---|
| Optical interface | One SC fiber port |
| Maximum fiber distance | 3 km with the matching B-end unit |
| Transmit wavelength | 1550 nm |
| Receive wavelength | 1310 nm |
| Fiber medium | 9/125 μm single-mode fiber |
| Copper cable medium | Category 5e or better UTP or STP |
| Ethernet standards | IEEE 802.3, 802.3u, 802.3ab, 802.3z and 802.3x |
| Specified DC power | 5 V DC, 0.4 A; input up to 12 V supported |
| Average optical transmit power | −17 to −6 dBm |
| Optical receive sensitivity | −22 dBm |
| Packet forwarding rate | 3 Mpps |
| MAC address table | 2K entries |
| Internal buffer | 1 Mbit |
| Dimensions | 94.5 × 73 × 27 mm |
| Operating temperature | −20 to +60 °C |
| Storage temperature | −40 to +70 °C |
| Operating humidity | 10–90% RH, non-condensing |
| Storage humidity | 5–90% RH, non-condensing |
| Status indicators | PWR; optical and electrical Link/Act |
Frequently Asked Questions
Which remote converter should be paired with TL-FC311A-3?
Use the TL-FC311B-3 as the matching B-end unit for the maximum 3 km link.
How many optical fibers does the link with TL-FC311A-3 require?
The WDM link uses one 9/125 μm single-mode fiber.
Why must the transmit and receive wavelengths be matched when using TL-FC311A-3?
The A-end transmits at 1550 nm and receives at 1310 nm, so the opposite endpoint must provide the complementary wavelengths.
Which Ethernet cable should connect the RJ45 port of TL-FC311A-3?
Use Category 5e or better UTP or STP cable for the adaptive 100/1000 Mbit/s copper port.
What does a flashing Link/Act indicator on TL-FC311A-3 mean?
A flashing Link/Act indicator shows that the corresponding port is transferring data.
Which power-adapter rating is specified for TL-FC311A-3?
The specified adapter output is 5 V DC at 0.4 A.
Can TL-FC311A-3 be installed in a humid location where condensation occurs?
The specified operating humidity is 10–90% RH without condensation.