EN
Siemens SINAMICS G110 6SL3211-0AB13-7UA1 0.37 kW AC Drive
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Great Britain
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SINAMICS G110 6SL3211-0AB13-7UA1 0.37 kW AC Drive
Official Siemens identification and technical data for 6SL3211-0AB13-7UA1, prepared for accurate replacement matching and quotation.
At a Glance
| Article Number | 6SL3211-0AB13-7UA1 |
|---|---|
| Manufacturer | Siemens |
| Platform | SINAMICS G110 |
| Product Type | CPM110 AC Drive |
| Country of Origin | Great Britain |
Exact Identification
Match the complete 6SL3211-0AB13-7UA1 article number and installed hardware.
System Matching
Confirm compatibility with the installed SINAMICS G110 configuration.
Configuration Check
Verify electrical data, connections and official Siemens documentation.
Product Overview
6SL3211-0AB13-7UA1 is officially identified by Siemens as an unfiltered SINAMICS G110 CPM110 AC drive for 200 to 240 V single-phase AC input, rated 0.37 kW with analog input.
The complete article number must be matched against the installed SINAMICS G110 hardware, nameplate and official Siemens documentation. Similar revisions can differ in ratings, I/O, interfaces, accessories and replacement conditions.
Key Functions
0.37 kW Motor Control
6SL3211-0AB13-7UA1 is rated at 0.37 kW for constant- and variable-torque applications.
Analog Control Input
Siemens identifies the analog-input version for 6SL3211-0AB13-7UA1.
IP20 Installation
6SL3211-0AB13-7UA1 has IP20 protection and an operating range of -10 to +50 °C.
Official Specifications
| Manufacturer | Siemens |
|---|---|
| Series | SINAMICS G110 |
| Article Number | 6SL3211-0AB13-7UA1 |
| Product Type | CPM110 AC drive |
| Input | 200 to 240 V 1 AC ±10%, 47 to 63 Hz |
| Power | 0.37 kW |
| Overload | 150% for 60 s |
| Control Input | Analog input |
| Interfaces Supplied | Without BOP; without RS-485 |
| Degree of Protection | IP20 |
| Dimensions | 150 x 90 x 116 mm (H x W x D) |
| Operating Temperature | -10 to +50 °C |
| Net Weight | 0.700 kg |
| Country of Origin | Great Britain |
| Product Lifecycle | PM410 Canceled Product; since 01 Oct 2020 |
Official source: Siemens official product data for 6SL3211-0AB13-7UA1. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
What is Siemens 6SL3211-0AB13-7UA1?
Siemens identifies 6SL3211-0AB13-7UA1 as an unfiltered SINAMICS G110 CPM110 AC drive for 200 to 240 V single-phase AC input, rated 0.37 kW with analog input.
Which Siemens platform uses 6SL3211-0AB13-7UA1?
6SL3211-0AB13-7UA1 is specified for the SINAMICS G110 platform.
What official configuration is specified for 6SL3211-0AB13-7UA1?
200 to 240 V 1 AC ±10%, 47 to 63 Hz; 0.37 kW; 150% constant-torque overload for 60 seconds; IP20.
Which connections or I/O does 6SL3211-0AB13-7UA1 provide?
Analog input; supplied without BOP and without RS-485 interface.
What should be checked before installing 6SL3211-0AB13-7UA1?
Verify the supply, signal levels, terminal allocation, surrounding hardware and installation instructions in the official Siemens documentation.
How should 6SL3211-0AB13-7UA1 be matched for replacement?
Match the complete 6SL3211-0AB13-7UA1 article number, installed hardware revision and application configuration; do not shorten or substitute the ordering code.
Which official Siemens source confirms 6SL3211-0AB13-7UA1?
The Siemens official product data and system documentation linked in the Official Specifications section confirm the identification and technical facts for 6SL3211-0AB13-7UA1.
Compatibility & Ordering Notes
Compatibility Checklist for 6SL3211-0AB13-7UA1
- Match the full 6SL3211-0AB13-7UA1 ordering code without shortening the suffix.
- Confirm the installed SINAMICS G110 system and hardware revision.
- Verify supply, I/O or interface data against the nameplate and Siemens manual.
- Confirm required terminal blocks, connectors and accessories in the written quotation.
