EN
Siemens SIMATIC TDC 6DD1607-0EA1 EXM 448-1 Communication Expansion Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6DD1607-0EA1 EXM 448-1 Communication Expansion Module
Official Siemens identification and technical data for 6DD1607-0EA1, prepared for accurate replacement matching and quotation.
At a Glance
| Article Number | 6DD1607-0EA1 |
|---|---|
| Manufacturer | Siemens |
| Platform | SIMATIC TDC |
| Product Type | EXM 448-1 Communication Expansion Module |
| Official Configuration | 5 V supply, typical current consumption 0.8 A, one slot |
Exact Identification
Match the complete Siemens article number 6DD1607-0EA1 and the photographed hardware revision.
Interfaces
PROFIBUS DP and integrated SLB for SIMOLINK
Configuration Check
Confirm 5 V supply, typical current consumption 0.8 A, one slot before replacement.
Product Overview
6DD1607-0EA1 is officially identified by Siemens as SIMATIC TDC EXM 448-1 Communication Expansion Module. 5 V supply, typical current consumption 0.8 A, one slot.
The complete article number 6DD1607-0EA1 should be matched against the installed hardware, nameplate and official system documentation. Similar revisions can differ in memory, interfaces, operating system or configuration.
Key Functions
Model-Specific Configuration
6DD1607-0EA1: 5 V supply, typical current consumption 0.8 A, one slot.
System Interface
6DD1607-0EA1: PROFIBUS DP and integrated SLB for SIMOLINK.
Replacement Control
6DD1607-0EA1: verify the complete article number, hardware revision and official project documentation before replacement.
Official Specifications
| Module Supply Voltage | 5 V DC |
|---|---|
| Typical Current Consumption | 0.8 A |
| Required Slots | 1 |
| Communication Expansion | PROFIBUS DP and SIMOLINK |
| SIMOLINK Hardware | Integrated SLB |
| SIMOLINK Physical Medium | Fiber-optic ring |
| SIMOLINK Ring Size | 2 to 201 SLB modules |
| SIMOLINK Master Count | One per ring |
| Synchronization Resolution | 100 µs increments |
| Supported SIMOLINK Timing | Non-synchronous, timer, automatic, external and external-cyclic modes |
| PROFIBUS Configuration Tool | COM PROFIBUS V5.0 |
| System Software | D7-SYS V5.2 |
| Approximate Weight | 0.8 kg |
Official source: Siemens Industry Mall product data for 6DD1607-0EA1. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
Which base module accepts 6DD1607-0EA1?
It is the EXM 448-1 communication expansion intended for the FM 458 application module.
How many nodes can share the SIMOLINK ring used by 6DD1607-0EA1?
A ring contains from two to two hundred one SLB modules, with exactly one master and all remaining nodes as slaves.
Does 6DD1607-0EA1 require a separate SIMOLINK board?
No. The SLB hardware is integrated in this communication-expansion version.
How should PROFIBUS DP be configured for 6DD1607-0EA1?
Use the Siemens configuration tool and match the master role, address, baud rate and telegram layout to the validated project.
What supply check is required before installing 6DD1607-0EA1?
Confirm the 5 V backplane supply and allow for the documented typical current consumption.
What project data should be saved before replacing 6DD1607-0EA1?
Archive the D7-SYS/CFC configuration, PROFIBUS parameters, SIMOLINK node roles, timing mode and fiber-ring order.
How is the fiber ring tested after fitting 6DD1607-0EA1?
Clean and inspect the optical connectors, verify transmit and receive order, then monitor synchronization and telegram diagnostics.
Compatibility & Ordering Notes
Compatibility Checklist for 6DD1607-0EA1
- Match the complete article number 6DD1607-0EA1 without shortening the suffix.
- Confirm the installed SIMATIC TDC family and hardware revision.
- Verify PROFIBUS DP and integrated SLB for SIMOLINK.
- Confirm included connectors, memory media and accessories in the written quotation.
