EN
Siemens SIMATIC S7-300T 6ES7315-7TJ10-0AB0 CPU 315T-3 PN/DP
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7315-7TJ10-0AB0 CPU 315T-3 PN/DP
Officially documented SIMATIC S7-300T component for technology and motion-control applications with integrated PROFINET and PROFIBUS DP.
At a Glance
| Brand / Manufacturer | Siemens |
|---|---|
| Model / Article Number | 6ES7315-7TJ10-0AB0 |
| Product Type | CPU 315T-3 PN/DP |
| Core Function | Full Siemens article number 6ES7315-7TJ10-0AB0 for exact spare-part matching. |
| Application / Compatible Series | SIMATIC S7-300T |
Exact Identification
Match the complete article number 6ES7315-7TJ10-0AB0, photographed nameplate and installed firmware or hardware revision before replacement.
Interface Arrangement
Confirm one PROFINET interface and two RS485 interfaces used by the installed project.
Configuration Check
Verify STEP 7 V5.5 SP2 with S7-Technology V4.2 SP3 or later before commissioning.
Product Overview
Siemens SIMATIC S7-300T 6ES7315-7TJ10-0AB0 CPU 315T-3 PN/DP is an officially documented SIMATIC S7-300T product designed for technology and motion-control applications with integrated PROFINET and PROFIBUS DP. Its article number identifies the exact hardware variant and should be matched in full when planning a replacement or spare.
The unit provides one PROFINET interface and two RS485 interfaces. Engineering, firmware, memory, rack, field wiring and network settings must be checked against the active project before installation.
Key Functions
Model-specific identification
Full Siemens article number 6ES7315-7TJ10-0AB0 for exact spare-part matching.
System role
Designed for technology and motion-control applications with integrated PROFINET and PROFIBUS DP.
Integrated communication
Provides one PROFINET interface and two RS485 interfaces.
Engineering continuity
Check STEP 7 V5.5 SP2 with S7-Technology V4.2 SP3 or later.
Power planning
24 V DC supply; typical power loss 7.5 W
Official Specifications
| CPU / Firmware | CPU 315T-3 PN/DP / V3.2 |
|---|---|
| Technology Firmware | V4.1.5 |
| Engineering Software | STEP 7 V5.5 SP2; S7-Technology V4.2 SP3 or later |
| Work Memory | 384 KB |
| Bit Operation Time | 0.05 µs |
| Word Operation Time | 0.09 µs |
| Fixed-Point Operation Time | 0.12 µs |
| Floating-Point Operation Time | 0.45 µs |
| Integrated Interfaces | 1 PROFINET; 2 RS485 |
| Supply Voltage | 24 V DC |
| Power Loss | Typical 7.5 W |
| Dimensions (W × H × D) | 120 × 125 × 130 mm |
| Weight | Approx. 640 g |
Frequently Asked Questions
Which software packages are needed to engineer 6ES7315-7TJ10-0AB0?
Use STEP 7 V5.5 SP2 or later together with S7-Technology V4.2 SP3 or later.
Which automation applications suit 6ES7315-7TJ10-0AB0?
The technology CPU is designed for S7-300 control tasks that combine standard automation with configured technological or motion functions.
Which networks are integrated in 6ES7315-7TJ10-0AB0?
One PROFINET interface and two RS-485 interfaces are available for the configured plant networks.
What memory and firmware data should be matched for 6ES7315-7TJ10-0AB0?
Check the 384 KB work-memory requirement, CPU firmware V3.2 and technology firmware V4.1.5 against the saved project.
What supply conditions apply when installing 6ES7315-7TJ10-0AB0?
Provide the specified 24 V DC supply and allow for approximately 7.5 W power consumption.
What must be backed up before exchanging 6ES7315-7TJ10-0AB0?
Archive the STEP 7 station, technology objects, motion parameters, network settings and the memory-card contents.
What mounting dimensions should be allowed for 6ES7315-7TJ10-0AB0?
Reserve approximately 120 × 125 × 130 mm and account for a mass of about 640 g.
Compatibility & Ordering Notes
Technology CPU Motion Integration Checklist for 6ES7315-7TJ10-0AB0
- Compare every character of the nameplate article number.
- Confirm the firmware or hardware revision supported by the engineering project.
- Check rack, connector, memory, power and environmental requirements.
- Record addressing, station names, redundancy and network parameters before removal.
- Keep a verified project backup and follow the official manufacturer installation instructions.
