EN
Siemens SIMATIC S7-1200 6ES7211-1BE40-0XB0 CPU 1211C AC/DC/Relay
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: China
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIMATIC S7-1200 6ES7211-1BE40-0XB0 CPU 1211C AC/DC/Relay
Official Siemens identification and technical data for 6ES7211-1BE40-0XB0, prepared for accurate replacement matching and quotation.
At a Glance
| Article Number | 6ES7211-1BE40-0XB0 |
|---|---|
| Manufacturer | Siemens |
| Platform | SIMATIC S7-1200 |
| Product Type | CPU 1211C AC/DC/Relay |
| Country of Origin | China |
Exact Identification
Match the complete 6ES7211-1BE40-0XB0 article number and installed hardware.
System Matching
Confirm compatibility with the installed SIMATIC S7-1200 configuration.
Configuration Check
Verify electrical data, connections and official Siemens documentation.
Product Overview
6ES7211-1BE40-0XB0 is officially identified by Siemens as a SIMATIC S7-1200 CPU 1211C compact controller with AC power supply, DC inputs and relay outputs.
The complete article number must be matched against the installed SIMATIC S7-1200 hardware, nameplate and official Siemens documentation. Similar revisions can differ in ratings, I/O, interfaces, accessories and replacement conditions.
Key Functions
Compact Controller
6ES7211-1BE40-0XB0 integrates the CPU, AC supply and onboard I/O in one S7-1200 compact unit.
Onboard I/O
Siemens specifies 6 DI, 4 relay DO and 2 analog inputs for 6ES7211-1BE40-0XB0.
Engineering Requirement
6ES7211-1BE40-0XB0 firmware V4.7 requires STEP 7 V20 or higher.
Official Specifications
| Manufacturer | Siemens |
|---|---|
| Series | SIMATIC S7-1200 |
| Article Number | 6ES7211-1BE40-0XB0 |
| Product Type | CPU 1211C AC/DC/relay |
| Power Supply | 85 to 264 V AC, 47 to 63 Hz |
| Digital Inputs | 6 x 24 V DC |
| Digital Outputs | 4 x relay, 2 A |
| Analog Inputs | 2 x 0 to 10 V DC |
| Memory | 75 KB program/data |
| Firmware / Engineering | V4.7 / STEP 7 V20 or higher |
| Net Weight | 0.384 kg |
| Packaging Dimension | 9.80 x 10.80 x 8.30 cm |
| Country of Origin | China |
| Product Lifecycle | PM300 Active Product; phase-out announced for 01 Nov 2026 |
Official source: Siemens official product data for 6ES7211-1BE40-0XB0. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
What is Siemens 6ES7211-1BE40-0XB0?
Siemens identifies 6ES7211-1BE40-0XB0 as a SIMATIC S7-1200 CPU 1211C compact controller with AC power supply, DC inputs and relay outputs.
Which Siemens platform uses 6ES7211-1BE40-0XB0?
6ES7211-1BE40-0XB0 is specified for the SIMATIC S7-1200 platform.
What official configuration is specified for 6ES7211-1BE40-0XB0?
85 to 264 V AC supply; 6 DI at 24 V DC; 4 relay DO rated 2 A; 2 AI at 0 to 10 V DC; 75 KB program/data memory.
Which connections or I/O does 6ES7211-1BE40-0XB0 provide?
6 digital inputs, 4 relay digital outputs and 2 analog inputs integrated in the compact CPU.
What should be checked before installing 6ES7211-1BE40-0XB0?
Verify the supply, signal levels, terminal allocation, surrounding hardware and installation instructions in the official Siemens documentation.
How should 6ES7211-1BE40-0XB0 be matched for replacement?
Match the complete 6ES7211-1BE40-0XB0 article number, installed hardware revision and application configuration; do not shorten or substitute the ordering code.
Which official Siemens source confirms 6ES7211-1BE40-0XB0?
The Siemens official product data and system documentation linked in the Official Specifications section confirm the identification and technical facts for 6ES7211-1BE40-0XB0.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7211-1BE40-0XB0
- Match the full 6ES7211-1BE40-0XB0 ordering code without shortening the suffix.
- Confirm the installed SIMATIC S7-1200 system and hardware revision.
- Verify supply, I/O or interface data against the nameplate and Siemens manual.
- Confirm required terminal blocks, connectors and accessories in the written quotation.
