Siemens SIMATIC NET A5E00219170 CP 5614 A2 PCI PROFIBUS Processor
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Identify the card as CP 5614 A2 rather than the original CP 5614 or CP 5614 A3.
- Use a compatible 32-bit PCI or PCI-X slot with the required voltage and clock support.
- Confirm the installed SIMATIC NET HARDNET-PB release and operating-system support.
- Back up master and slave interface parameters, GSD data and PC-station configuration.
- Use straight PROFIBUS connectors when both D-sub interfaces are occupied.
- Power down the PC and follow ESD precautions before hardware replacement.
- Verify both network segments, termination and baud rate after restoring the project.
Siemens · SIMATIC NET CP 5614 A2
A5E00219170 Dual-Interface PCI PROFIBUS Communications Processor
Siemens A5E00219170 identifies the SIMATIC NET CP 5614 A2 communications processor. The short universal PCI card provides two PROFIBUS interfaces, hardware-assisted DP master and slave functions, and transfer rates up to 12 Mbit/s for PC-based automation communication.
At a Glance
| Brand | Siemens |
|---|---|
| Model | A5E00219170 |
| Product Type | HARDNET PROFIBUS PCI Card |
| Core Function | Provides hardware-assisted PROFIBUS master and slave communication for a PC station |
| Application or Compatible Series | SIMATIC NET HARDNET-PB systems using CP 5614 A2 hardware |
A2 Hardware Identity
Use the A5E part number only for CP 5614 A2 and do not mix it with the original CP 5614 or later A3 card.
PCI Slot Check
Confirm a 3.3 V or 5 V 32-bit PCI or PCI-X slot operating at 33 or 66 MHz.
Two-Network Configuration
Record the separate master and slave interface addresses, bus parameters, connectors and GSD configuration before replacement.
Product Overview
Siemens A5E00219170 identifies the SIMATIC NET CP 5614 A2 communications processor. The short universal PCI card provides two PROFIBUS interfaces, hardware-assisted DP master and slave functions, and transfer rates up to 12 Mbit/s for PC-based automation communication.
Offloads protocol processing from the host PC for deterministic HARDNET-PB communication. Combines an ASPC2R master controller with a DPC31 slave controller on one card. Fits supported 3.3 V and 5 V 32-bit PCI or PCI-X systems with plug-and-play enumeration.
Key Functions
Hardware-Assisted PROFIBUS
Offloads protocol processing from the host PC for deterministic HARDNET-PB communication.
Independent Master and Slave Interfaces
Combines an ASPC2R master controller with a DPC31 slave controller on one card.
Universal PCI Integration
Fits supported 3.3 V and 5 V 32-bit PCI or PCI-X systems with plug-and-play enumeration.
Official Specifications
| Module Format | Short PCI card |
|---|---|
| Bus Interface Standard | PCI V2.2 with plug and play |
| Host-Slot Compatibility | PCI or PCI-X, 3.3 V or 5 V, 32 bit, 33 or 66 MHz |
| Rated Operating Voltage | 5 V DC SELV |
| Permissible Voltage Range | 4.75 to 5.25 V DC |
| Typical PCI Current Consumption | 0.9 A |
| PROFIBUS Interface Count | Two |
| PROFIBUS Connector | 9-pin D-sub female with screw locking |
| Transmission Type | Floating RS 485 within SELV limits |
| Transfer-Rate Range | 9.6 kbit/s to 12 Mbit/s |
| Master Controller | ASPC2R ST E2a |
| Slave Controller | DPC31 |
| EMC Emission Class | Class B to EN 55022 and FCC Class B |
| Signal-Line Surge Immunity | +/-2 kV to EN 61000-4-5 |
| Contact-Discharge Immunity | +/-6 kV to IEC 61000-4-2 |
| Storage and Transport Temperature | -40 to +70 degrees C |
| Operating Relative Humidity | 85% at 30 degrees C, non-condensing |
| Dimensions | 107 x 18 x 168 mm |
| Approximate Weight | 120 g |
Frequently Asked Questions
Which PC slot should I use for A5E00219170?
Use a supported 32-bit PCI or PCI-X slot that supplies the permitted 3.3 V or 5 V signaling environment.
Why does A5E00219170 have two PROFIBUS connectors?
One interface supports the master controller while the second provides the independent slave-controller function.
Which PROFIBUS connectors fit A5E00219170?
Use straight 9-pin D-sub bus connectors with screw locking when both interfaces are connected.
What supply does A5E00219170 draw from the PC?
The card operates from 5 V DC within 4.75 to 5.25 V and typically draws 0.9 A from the PCI slot.
Can A5E00219170 be inserted while the PC is powered?
No, shut down and isolate the PC before installing or removing the communications processor.
What configuration should I preserve before exchanging A5E00219170?
Back up the PC-station project, master and slave addresses, GSD configuration, bus rates and SIMATIC NET access points.
Can A5E00219170 replace the original CP 5614 without review?
Verify the SIMATIC NET software release, host slot, driver support and complete PROFIBUS configuration before migrating from the earlier card.