Siemens Acvatix SKC32.60 Electrohydraulic Valve Actuator 2800 N
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Confirm that the valve appears in the approved Siemens equipment combinations.
- Provide sufficient clearance for mounting, manual operation and service.
- Use a stem heater whenever the controlled medium can fall below 0 °C.
SIEMENS ACVATIX
Siemens Acvatix SKC32.60 Electrohydraulic Valve Actuator 2800 N
Electrohydraulic 2800 N actuator with 40 mm stroke, AC 230 V supply and 120-second three-position travel for large control valves.
At a Glance
| Brand | Siemens |
|---|---|
| Model | SKC32.60 |
| Product Type | Electrohydraulic valve actuator |
| Core Function | Positions large-stroke control valves with three-position control |
| Application | Siemens Acvatix flanged control-valve assemblies |
Exact Identification
Electrohydraulic valve actuator for the specified Siemens system.
Core Application
Siemens Acvatix flanged control-valve assemblies.
Configuration Focus
Verify the valve type and stroke, required closing force, 230 V wiring, three-position controller and any auxiliary switch, potentiometer or stem-heater option.
Product Overview
The SKC32.60 is an electrohydraulic actuator for operating compatible large-stroke Siemens control valves.
It provides 2800 N positioning force, 40 mm nominal stroke and three-position control from an AC 230 V supply without a spring-return function.
Key Functions
Primary Function
Positions large-stroke control valves with three-position control.
System Integration
It mounts to approved Siemens valve families and uses AC 230 V three-position control.
Commissioning Focus
Verify the valve type and stroke, required closing force, 230 V wiring, three-position controller and any auxiliary switch, potentiometer or stem-heater option.
Official Specifications
| Actuator Type | Electrohydraulic valve actuator |
|---|---|
| Operating Voltage | AC 230 V ±15% |
| Frequency | 50 / 60 Hz |
| Control Signal | 3-position |
| Positioning Force | 2800 N |
| Nominal Stroke | 40 mm |
| Opening Time | 120 s at 50 Hz |
| Closing Time | 120 s at 50 Hz |
| Spring Return | No |
| Maximum Power Consumption | 18 VA / 14 W at 50 Hz |
| Medium Temperature with Valve | -25 to +220 °C |
| Stem Heater Requirement | Required below 0 °C medium temperature |
| Wire Cross-Section | 0.5 to 2.5 mm² |
| Cable Entries | 4 x M20 |
| Housing Protection | IP54 upright to sideways |
| Operating Temperature | -15 to +55 °C |
| Operating Humidity | 5 to 95% RH, non-condensing |
| Weight | 9.80 kg |
Frequently Asked Questions
Which control signal operates SKC32.60?
Use a three-position controller with separate open and close commands.
What valve stroke is matched by SKC32.60?
The nominal actuator stroke is 40 mm.
Does SKC32.60 return by spring when power is removed?
No, this variant does not include a spring-return function.
How long does SKC32.60 take to travel?
Opening and closing each take 120 seconds at 50 Hz under the stated conditions.
What supply is required for SKC32.60?
Provide AC 230 V within the specified tolerance and protect the circuit as required.
Can SKC32.60 be used with media below freezing?
A compatible stem heater is required when the controlled medium is below 0 °C.
Which checks are important when fitting SKC32.60 to a valve?
Confirm the approved valve family, 40 mm stroke, required force, mounting clearance and control wiring.