Siemens 6XV1875-5CH10 SIMATIC NET N-Connect/R-SMA Antenna Cable 1 m
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Verify both mating connector types before ordering.
- Include the stated attenuation in the RF path budget.
- Respect the 32 mm single-bend and 45 mm repeated-bend radii.
- Keep installation temperature within −25 to +80 °C and fully connect the interfaces for IP68.
6XV1875-5CH10 SIMATIC NET N-Connect/R-SMA Antenna Cable 1 m
A flexible 1 m antenna cable with N-Connect and R-SMA male ends, a 50 Ω impedance and transmission frequencies up to 6 GHz.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6XV1875-5CH10 |
| Product Type | Preassembled coaxial connecting cable |
| Core Function | Connecting an antenna to an access point or client |
| Application | Compatible SIMATIC NET wireless equipment |
Preassembled ends
The cable has N-Connect male and R-SMA male connectors.
Defined RF path
The 50 Ω cable supports frequencies from 0 to 6000 MHz.
Flexible routing
Different minimum radii apply to single and repeated bending.
Product Overview
6XV1875-5CH10 connects an access point or client to an antenna using its N-Connect and R-SMA male ends. The preassembled one-metre cable supports RCoax and other compatible antenna arrangements.
The construction combines a copper inner conductor, polyethylene-foam dielectric and tinned-copper braided shield. A pastel-turquoise FRNC sheath surrounds the cable, with IP68 protection specified when connected.
Key Functions
Link the wireless equipment and antenna
The preassembled N-Connect/R-SMA cable provides the antenna connection to an access point or client.
Carry the RF signal
The 50 Ω signal path operates over a transmission-frequency range up to 6000 MHz.
Accommodate the installation route
The flexible cable allows a 32 mm single-bend radius or a 45 mm repeated-bend radius.
Official Specifications
| Cable length | 1 m |
|---|---|
| Connector ends | N-Connect male / R-SMA male |
| Transmission-frequency range | 0–6000 MHz |
| Nominal impedance | 50 Ω |
| Typical attenuation | 0.53 dB/m at 2.4 GHz; 0.83 dB/m at 5.2 GHz; 0.89 dB/m at 5.85 GHz |
| Minimum return loss | 23 dB |
| Capacitance per length | 82 pF/m at 1 kHz |
| Relative propagation speed | 82% |
| Cable outer diameter | 6.3 mm ±0.2 mm |
| Conductor and dielectric diameters | 1.4 mm inner conductor; 3.8 mm dielectric |
| Cable construction | Copper conductor, polyethylene-foam dielectric and tinned-copper braided shield |
| Sheath | FRNC; pastel turquoise; 0.76 mm thick |
| Minimum bending radius | 32 mm for a single bend; 45 mm for repeated bends |
| Maximum tensile load | 80 N |
| Weight per length | 75 kg/km |
| Operation, storage and transport temperature | −40 to +80 °C |
| Installation temperature | −25 to +80 °C |
| Connected ingress protection | IP68 |
Frequently Asked Questions
Which connector ends must match the installation for 6XV1875-5CH10?
The cable is terminated with N-Connect male and R-SMA male connectors.
How tightly can I bend 6XV1875-5CH10 during routing?
Keep the bend radius at least 32 mm for a single bend or 45 mm for repeated bending.
What RF loss should I budget at 5.85 GHz for 6XV1875-5CH10?
The typical cable attenuation is 0.89 dB per metre at 5.85 GHz.
Does the IP68 rating of 6XV1875-5CH10 apply to an unplugged connection?
The IP68 rating applies when the cable is plugged in.
Can I install 6XV1875-5CH10 at the lowest permitted operating temperature?
Installation is permitted from −25 °C, while operation is permitted down to −40 °C.
What impedance should the RF equipment connected through 6XV1875-5CH10 use?
The cable has a nominal impedance of 50 Ω.
What pulling force is permitted when routing 6XV1875-5CH10?
The maximum tensile load is 80 N.