Siemens 6SN1114-0NB01-0AA0 SIMODRIVE 611 U PROFIBUS DP3 Option Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use a control-board and software combination approved for the installed SIMODRIVE drive.
- Match the PROFIBUS master telegram and process-data configuration to the drive application.
- Connect the bus at X423 and maintain the required cable shielding.
- Tighten the optional-module retaining screws to no more than 0.8 N·m.
6SN1114-0NB01-0AA0 SIMODRIVE 611 U PROFIBUS DP3 Option Module
A clock-synchronous PROFIBUS DP slave option for up to two axes, supporting cyclic and acyclic exchange at up to 12 Mbaud.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6SN1114-0NB01-0AA0 |
| Product Type | Drive communication option board |
| Core Function | Clock-synchronous motion communication |
| Application | SIMODRIVE 611 U and universal E |
Synchronous drive coupling
The DP slave can participate in clock-synchronous motion control with a compatible PROFIBUS master.
Process and parameter exchange
Cyclic process-data transfer and acyclic data exchange are available through the PROFIBUS connection.
Two-axis communication
The standard-slave option supports up to two axes at communication rates up to 12 Mbaud.
Product Overview
6SN1114-0NB01-0AA0 adds PROFIBUS DP motion-control communication to the compatible SIMODRIVE 611 universal drive arrangement.
The DP3 option enables clock-synchronous coupling to a suitable DP master and exchanges cyclic process data together with acyclic parameter traffic.
Key Functions
Synchronous drive coupling
The DP slave can participate in clock-synchronous motion control with a compatible PROFIBUS master.
Process and parameter exchange
Cyclic process-data transfer and acyclic data exchange are available through the PROFIBUS connection.
Two-axis communication
The standard-slave option supports up to two axes at communication rates up to 12 Mbaud.
Official Specifications
| Maximum axis capacity | 2 axes |
|---|---|
| Bus role | Clock-synchronous standard DP slave |
| Maximum communication rate | 12 Mbaud |
| Data-transfer modes | Cyclic and acyclic exchange |
| Fieldbus interface | PROFIBUS DP on connector X423 |
| Connector construction | 9-pin Sub-D interface |
| Cyclic telegram content | PKW parameter area and PZD process-data area |
| Optional-module diagnostics | Two-color diagnostic LED |
| Maximum retaining-screw torque | 0.8 N·m |
Frequently Asked Questions
Can 6SN1114-0NB01-0AA0 exchange motion data in a clock-synchronous cycle?
The DP3 option supports clock-synchronous PROFIBUS operation with a compatible DP master.
How many axes can communicate through 6SN1114-0NB01-0AA0?
The option supports up to two axes.
Can 6SN1114-0NB01-0AA0 carry parameter traffic as well as cyclic process values?
The module supports cyclic process-data communication and acyclic data exchange.
Where do I connect the PROFIBUS cable on 6SN1114-0NB01-0AA0?
The fieldbus connection is made at the nine-pin Sub-D interface X423.
Can 6SN1114-0NB01-0AA0 be used in the SIMODRIVE 611 universal E arrangement with SINUMERIK 802D?
The DP3 option supports the clock-synchronous coupling between a compatible universal E drive and the SINUMERIK 802D DP master.
How tight should I secure the retaining screws of 6SN1114-0NB01-0AA0?
The maximum retaining-screw torque is 0.8 N·m to maintain the shield contact.
Which parameter and process-data areas are used with 6SN1114-0NB01-0AA0?
Cyclic communication uses the PKW parameter area and the PZD process-data area.