Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6sl3544 0fb21 1pa0 sinamics g120d cu240d 2 dp f-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SINAMICS G120D 6SL3544-0FB21-1PA0 CU240D-2 DP-F Control Unit

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SINAMICS G120D

6SL3544-0FB21-1PA0 CU240D-2 DP-F Control Unit

Siemens 6SL3544-0FB21-1PA0 is the SINAMICS G120D CU240D-2 DP-F distributed drive control unit with PROFIBUS DP, PROFIsafe and integrated fail-safe motion functions; the Power Module is selected separately.

At a Glance

Brand Siemens
Model 6SL3544-0FB21-1PA0
Product Type SINAMICS G120D CU240D-2 DP-F Control Unit
Core Function Controls distributed three-phase motor drives with integrated safety
Application or Compatible Series SINAMICS G120D with a compatible PM250D Power Module

Exact DP-F Identification

Use the PROFIBUS and PROFIsafe variant with its dedicated HTL encoder input.

Safety Architecture

Validate STO, SS1, SLS, SDI and SSM for the required SIL 2 or PL d Category 3 application.

System Assembly

Provide an external 24 V DC supply and select a PM250D Power Module for the connected motor.

Product Overview

Siemens 6SL3544-0FB21-1PA0 is the SINAMICS G120D CU240D-2 DP-F distributed drive control unit with PROFIBUS DP, PROFIsafe and integrated fail-safe motion functions; the Power Module is selected separately.

Exchanges command, status and safety data through PROFIBUS DP and PROFIsafe. Implements STO, SS1, SLS, SDI and SSM without a separate external safety controller for the drive functions. Provides configurable I/O, USB service, SD/MMC memory and an HTL encoder connection.

Ordering focus: confirm the DP-F variant, compatible PM250D Power Module, motor rating, 24 V DC supply, PROFIBUS address and termination, PROFIsafe parameters, HTL encoder wiring, safety validation and SD/MMC backup.

Key Functions

PROFIBUS Drive Control

Exchanges command, status and safety data through PROFIBUS DP and PROFIsafe.

Integrated Fail-Safe Motion

Implements STO, SS1, SLS, SDI and SSM without a separate external safety controller for the drive functions.

Local Commissioning Interfaces

Provides configurable I/O, USB service, SD/MMC memory and an HTL encoder connection.

Official Specifications

Operating Voltage External 24 V DC required
Current Consumption 300 mA with FSA/FSB Power Modules; 450 mA with an FSC Power Module
Standard Digital Inputs 6
Fail-Safe Digital Inputs 3 inputs can be parameterized as F-DI
Digital Outputs 2
Fail-Safe Digital Output 1 output can be parameterized as F-DO
Analog Inputs 2
Fieldbus PROFIBUS DP
Safety Communication PROFIsafe
Encoder Interface HTL
Service Interface USB
Memory Card Interface SD/MMC
Integrated Safety Functions STO, SS1, SLS, SDI and SSM
Safety Rating IEC 61508 SIL 2; ISO 13849-1 PL d, Category 3
Degree of Protection IP65
Operating Temperature 0 to +55 °C
Storage Conditions −40 to +70 °C; less than 95% relative humidity without condensation
Dimensions and Weight 153 × 208 × 55 mm; approximately 0.8 kg

Frequently Asked Questions

Which power module should I pair with 6SL3544-0FB21-1PA0?

Pair the control unit with a PM250D selected for the motor rated power and current.

Which fieldbus should I prepare for 6SL3544-0FB21-1PA0?

Use PROFIBUS DP for drive communication and PROFIsafe when integrated safety functions are transferred over the bus.

Can 6SL3544-0FB21-1PA0 run without a separate control supply?

No, the control unit requires an external 24 V DC supply.

Which safety functions are available in 6SL3544-0FB21-1PA0?

The fail-safe variant provides STO, SS1, SLS, SDI and SSM.

How much fail-safe I/O does 6SL3544-0FB21-1PA0 provide?

Three of the six digital inputs and one of the two digital outputs can be parameterized for fail-safe operation.

Which motor encoder can I connect to 6SL3544-0FB21-1PA0?

Use an HTL encoder with the dedicated encoder interface.

How can I transfer commissioning data when replacing 6SL3544-0FB21-1PA0?

Save the parameter set on the supported SD/MMC card and verify the firmware and PM250D configuration before restart.

Compatibility & Ordering Notes

Before ordering 6SL3544-0FB21-1PA0: confirm the DP-F variant, compatible PM250D Power Module, motor rating, 24 V DC supply, PROFIBUS address and termination, PROFIsafe parameters, HTL encoder wiring, safety validation and SD/MMC backup.

Compatibility Checklist

  • Confirm the DP-F PROFIBUS version and do not substitute a different fieldbus variant.
  • Select a compatible PM250D Power Module for the actual motor rated power and current.
  • Provide and size the external 24 V DC control supply.
  • Retain the PROFIBUS address, termination and PROFIsafe parameters.
  • Verify the HTL encoder wiring and repeat the required safety validation before operation.
Hot Selling Models
PTM14D20
LC1D09V7
ESR4-NO-31-230VAC 18838452-L1
0822391606
C60N C10 23756
BN5983.53 0031885
ABB S401MC13 + ABB SK400
SMT-8M-A-ZS-24V-E-20-OE-EX2
3RF2320-1AA02-0KN0
SG7121 63A
3RT1024-1BB44-3MA0 3RT1926-1BB00
PKZM0-0.63-T XTPTP63BC1
281-334 281334 02810334
19175
6ES5431-8MA11

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.