Siemens SCALANCE X106-1 6GK5106-1BB00-2AA3 Unmanaged Industrial Ethernet Switch
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match connected copper devices to 10/100 Mbit/s Ethernet.
- Use multimode 100Base-FX fiber with ST/BFOC termination.
- Verify the optical budget and fiber attenuation before selecting the link length.
- Provide redundant 24 V DC supply wiring through the four-pole terminal.
- Use DIN-rail, wall or S7-300 rail mounting and do not plan an S7-1500 rail.
Siemens · SCALANCE X-100
6GK5106-1BB00-2AA3 SCALANCE X106-1 Unmanaged Ethernet Switch
Siemens 6GK5106-1BB00-2AA3 is the SCALANCE X106-1 unmanaged Industrial Ethernet switch with six 10/100 Mbit/s RJ45 ports and one 100 Mbit/s multimode ST/BFOC fiber port.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK5106-1BB00-2AA3 |
| Product Type | SCALANCE X106-1 Industrial Ethernet Switch |
| Core Function | Provides unmanaged Layer 2 forwarding between copper and multimode-fiber segments |
| Application or Compatible Series | SIMATIC NET SCALANCE X-100 industrial networks |
Mixed-Media Port Layout
Combine six copper RJ45 connections with one multimode BFOC fiber port.
Power and Fault Wiring
Use the redundant 24 V DC supply input and separate error-signaling contact.
Mounting Selection
Install on 35 mm DIN rail, wall or S7-300 rail; do not use an S7-1500 rail.
Product Overview
Siemens 6GK5106-1BB00-2AA3 is the SCALANCE X106-1 unmanaged Industrial Ethernet switch with six 10/100 Mbit/s RJ45 ports and one 100 Mbit/s multimode ST/BFOC fiber port.
Forwards 10/100 Mbit/s Industrial Ethernet traffic without switch-management configuration. The 100Base-FX BFOC interface extends the copper network over multimode fiber. LEDs and the configurable signaling contact support local status and fault monitoring.
Key Functions
Unmanaged Ethernet Switching
Forwards 10/100 Mbit/s Industrial Ethernet traffic without switch-management configuration.
Multimode Fiber Extension
The 100Base-FX BFOC interface extends the copper network over multimode fiber.
Local Diagnostics and Fault Output
LEDs and the configurable signaling contact support local status and fault monitoring.
Official Specifications
| Ethernet Transfer Rates | 10 and 100 Mbit/s |
|---|---|
| Copper Network Interfaces | 6 RJ45 ports with securing collars |
| Fiber Interface | 1 multimode ST/BFOC port at 100 Mbit/s |
| Copper-Port Operating Modes | MDI-X assignment; half-duplex or full-duplex |
| Signaling Contact | 2-pole terminal block; 24 V DC, 0.1 A maximum |
| Power Connection | 4-pole terminal block with redundant voltage-supply connection |
| Rated Supply Voltage | 24 V DC |
| Maximum Current and Power Loss | 0.15 A maximum; 3.6 W rated power loss |
| Supply-Input Fuse | 0.6 A / 60 V |
| Ambient Temperature | Operation −10 to +60 °C; storage and transport −40 to +80 °C |
| Relative Humidity | Up to 95% at 25 °C, non-condensing |
| Protection Rating | IP30 |
| Dimensions | 60 × 125 × 124 mm |
| Net Weight | 0.78 kg |
| Mounting Methods | 35 mm DIN rail, wall or S7-300 rail; S7-1500 rail not supported |
| Learnable MAC Addresses | 2,048 |
| MAC Address Aging Time | 30 seconds |
| Maximum Ethernet Frame Size | 1,536 bytes |
| Optical Transmitter Levels | Minimum −24 dBm with 50 µm fiber or −20 dBm with 62.5 µm fiber; maximum −14 dBm |
| Optical Receiver and Cable Reach | Sensitivity −31 dBm; maximum input −12 dBm; up to 3 km with OM1 fiber or 5 km at 1 dB/km maximum attenuation |
Frequently Asked Questions
How many network connections are available on 6GK5106-1BB00-2AA3?
The switch provides six 10/100 Mbit/s RJ45 ports and one 100 Mbit/s multimode BFOC port.
Which fiber interface should I connect to 6GK5106-1BB00-2AA3?
Use a compatible multimode 100Base-FX link with an ST/BFOC connector and a verified optical power budget.
How do I provide redundant power to 6GK5106-1BB00-2AA3?
Wire redundant 24 V DC feeds through the four-pole supply terminal and keep the input within its protection limits.
What load can the fault contact of 6GK5106-1BB00-2AA3 switch?
The two-pole signaling contact is rated for 24 V DC at a maximum of 0.1 A.
Where can I mount 6GK5106-1BB00-2AA3?
Install it on a 35 mm DIN rail, an S7-300 rail or a wall, but not on an S7-1500 rail.
Will 6GK5106-1BB00-2AA3 require switch-management configuration?
It is an unmanaged switch, so normal forwarding operation does not require network-management configuration.
What environmental limits apply to 6GK5106-1BB00-2AA3?
Operate the unit from −10 to +60 °C at up to 95% non-condensing relative humidity within an IP30 installation.