Siemens 6GK1500-3AA00 SIMATIC NET PROFIBUS OBT Optical Bus Terminal
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the PROFIBUS electrical interface and configured network transfer rate.
- Select POF or PCF fiber and keep both length and attenuation within the corresponding limits.
- Order the required Simplex plugs separately.
- Provide the specified DC supply and use a supported DIN-rail or wall installation without assuming ring redundancy.
6GK1500-3AA00 SIMATIC NET PROFIBUS OBT Optical Bus Terminal
PROFIBUS OBT with one nine-pin electrical interface, two optical duplex interfaces and support for POF or PCF fiber links.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK1500-3AA00 |
| Product Type | PROFIBUS optical bus terminal |
| Core Function | Electrical-to-optical PROFIBUS connection |
| Application | PROFIBUS nodes without an integrated optical interface |
Electrical node attachment
A nine-pin Sub-D socket connects the PROFIBUS electrical node.
Optical bus extension
Two duplex optical interfaces support POF or PCF fiber transmission.
Compact cabinet mounting
DIN-rail and wall mounting support installation beside the connected node.
Product Overview
6GK1500-3AA00 connects a PROFIBUS node without its own optical interface to an optical PROFIBUS network.
The compact terminal supports a nine-pin Sub-D electrical connection and two optical interfaces, with fiber-dependent link lengths and a twenty-four-volt DC supply.
Key Functions
Electrical node attachment
A nine-pin Sub-D socket connects the PROFIBUS electrical node.
Optical bus extension
Two duplex optical interfaces support POF or PCF fiber transmission.
Compact cabinet mounting
DIN-rail and wall mounting support installation beside the connected node.
Official Specifications
| PROFIBUS transfer rates | 9.6 kbit/s to 12 Mbit/s |
|---|---|
| Electrical network interface | 1 nine-pin Sub-D socket |
| Optical interfaces | 2 duplex optical ports |
| Optical wavelength | 660 nm for POF / PCF |
| PCF fiber and maximum length | 200/230 µm; 300 m at 10 dB/km |
| POF fiber and maximum length | 980/1000 µm; 50 m at 230 dB/km |
| Maximum optical link attenuation | 3 dB for PCF; 13 dB for POF |
| Propagation delay | 6.5 bit times |
| Power supply | 24 V DC rated; 19.2–28.8 V DC permitted |
| Power connection | 3-pole terminal block |
| Operating ambient | 0 to +60°C |
| Storage and transport ambient | −40 to +70°C |
| Maximum humidity | 95% at 25°C, non-condensing |
| Enclosure protection | IP30 |
| Mounting methods | 35 mm DIN rail or wall |
| Ring redundancy | Not supported |
| Dimensions and net weight | 50.5 × 138 × 78 mm (W × H × D); 400 g |
| Plug supply scope | Without Simplex plugs |
Frequently Asked Questions
Can 6GK1500-3AA00 add an optical connection to a PROFIBUS node that has no optical interface?
The terminal connects such a node through its nine-pin Sub-D electrical socket to the optical PROFIBUS network.
Are Simplex plugs supplied with 6GK1500-3AA00?
The listed supply scope excludes Simplex plugs.
Which fiber permits the longer link from 6GK1500-3AA00?
PCF fiber permits up to three hundred metres, while POF fiber permits up to fifty metres under the stated attenuation conditions.
Can 6GK1500-3AA00 operate at a PROFIBUS rate of twelve megabits per second?
The stated PROFIBUS transfer-rate range extends to twelve megabits per second.
Can I use 6GK1500-3AA00 as a ring-redundancy device?
Ring redundancy is not supported by this terminal.
Does 6GK1500-3AA00 require a regulated twenty-four-volt cabinet supply?
The terminal requires a DC supply within nineteen-point-two to twenty-eight-point-eight volts.
Can I mount 6GK1500-3AA00 directly on a cabinet wall?
The terminal supports wall mounting as well as mounting on a thirty-five-millimetre DIN rail.