Siemens 6GK1500-0EA02 SIMATIC NET Axial PROFIBUS Bus Connector
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Provide clearance for a 15 × 57 × 39 mm connector body and the axial cable bend.
- Use the termination switch only at the required segment end because it isolates the onward bus.
- Plan programming access separately because no PG socket is fitted.
- Keep the installation within the IP20 and 0 to 60°C operating limits.
6GK1500-0EA02 SIMATIC NET Axial PROFIBUS Bus Connector
A metal PROFIBUS connector with an axial cable exit, terminal-block wiring and a switchable bus termination.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK1500-0EA02 |
| Product Type | RS485 bus connector |
| Core Function | Connect a fieldbus node to its bus cable |
| Application | Industrial PCs, SIMATIC OP and OLM |
Axial installation
The cable leaves the connector in line with the mating interface.
Conventional wiring
Terminal blocks connect the two PROFIBUS bus cables.
Segment termination
The slide switch selects the resistor network and disconnects the outgoing bus.
Product Overview
6GK1500-0EA02 connects PROFIBUS nodes through a nine-pin Sub-D interface and two cable connections, with transfer rates from 9.6 kbit/s to 12 Mbit/s.
The metal enclosure, screw locking and integrated strain relief suit cabinet fieldbus wiring where the cable must leave straight behind the node. The connector has no additional PG socket.
Key Functions
Terminate a segment end
The integrated resistor combination is selected with a slide switch; selecting termination isolates the outgoing bus connection.
Secure the node connection
The screwed joint holds the nine-pin Sub-D connection while the strain relief supports the cable entry.
Route cables behind the device
The 180-degree outlet suits an axial cable route at industrial PCs, operator panels and optical link modules.
Official Specifications
| PROFIBUS Transfer Rate | 9.6 kbit/s to 12 Mbit/s |
|---|---|
| Bus Cable Connections | 2 terminal-block connections |
| Device Connection | 1 nine-pin Sub-D connector |
| FastConnect Assembly | No |
| Cable Outlet Angle | 180° |
| Termination | Integrated resistor combination selected by slide switch |
| Outgoing Bus Isolation | Disconnected when termination is switched on |
| Enclosure Material | Metal |
| Locking Method | Screwed joint |
| PG Socket | Not fitted |
| Cable Strain Relief | Integrated |
| Dimensions (W × H × D) | 15 × 57 × 39 mm |
| Net Weight | 100 g |
| Operating Temperature | 0 to 60°C |
| Storage and Transport Temperature | −25 to +80°C |
| Maximum Relative Humidity | 75% at 25°C, non-condensing |
| Ingress Protection | IP20 |
| Silicone-Free Construction | Yes |
Frequently Asked Questions
Can I wire 6GK1500-0EA02 with a FastConnect stripping tool alone?
No, the bus conductors are connected through terminal blocks rather than FastConnect insulation-displacement contacts.
What happens to the onward cable when I terminate 6GK1500-0EA02?
Switching the integrated termination on disconnects the outgoing bus connection.
Does 6GK1500-0EA02 provide a separate socket for my programming device?
No, this connector has no PG connection socket.
Will 6GK1500-0EA02 fit the required cable route on a MICROMASTER 4 FX or GX frame?
This axial connector is the mechanically specified PROFIBUS plug for MICROMASTER 4 FX and GX frames.
Can 6GK1500-0EA02 remain in a cabinet that reaches 65°C?
No, its permitted operating temperature ends at 60°C.
How should I secure 6GK1500-0EA02 against cable movement?
Use the screwed connector lock and the integrated cable strain relief.
Is 6GK1500-0EA02 suitable for a 12 Mbit/s PROFIBUS segment?
Yes, the connector supports PROFIBUS transmission rates up to 12 Mbit/s.