EN
Siemens SIMATIC NET OSM TP62 Optical Switch Module 6GK1105-2AB10
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMATIC NET OSM/ESM
6GK1105-2AB10 SIMATIC NET OSM TP62 Optical Switch Module
The OSM TP62 combines six 10/100 Mbit/s RJ45 ports, two 100 Mbit/s multimode optical ports and eight monitored digital inputs.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6GK1105-2AB10 |
| Product Type | managed optical Industrial Ethernet switch module |
| Core Function | Builds mixed copper and multimode-fiber Industrial Ethernet ring, line or star networks |
| Application or Compatible Series | Industrial Ethernet OSM/ESM networks using TP copper and 100Base-FX multimode fiber |
Exact Identification
Match 6GK1105-2AB10 character by character and confirm the complete SIMATIC NET OSM TP62 Optical Switch Module designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The OSM TP62 combines six 10/100 Mbit/s RJ45 ports, two 100 Mbit/s multimode optical ports and eight monitored digital inputs.
Six twisted-pair device ports connect to two optical ring ports for flexible plant topologies. Up to 50 OSM units can form a redundant optical ring with a documented reconfiguration time below 0.3 seconds. Eight isolated 24 V DC inputs can be monitored through network-management functions.
Key Functions
Mixed Copper and Fiber Switching
Six twisted-pair device ports connect to two optical ring ports for flexible plant topologies.
Fast Fiber Redundancy
Up to 50 OSM units can form a redundant optical ring with a documented reconfiguration time below 0.3 seconds.
Digital Input Monitoring
Eight isolated 24 V DC inputs can be monitored through network-management functions.
Official Specifications
| Product Type | OSM TP62 with digital inputs |
|---|---|
| Electrical Ports | 6 × RJ45 |
| Electrical Data Rate | 10/100 Mbit/s |
| Copper Functions | Auto-Negotiation and Auto-Crossover |
| Optical Ports | 2 × BFOC pairs |
| Optical Standard | 100Base-FX full duplex |
| Maximum Multimode Link | 3,000 m |
| Maximum Ring Nodes | 50 |
| Maximum Ring Circumference | 150 km |
| Digital Inputs | 8 × 24 V DC |
| Digital-Input Current | 8 mA maximum |
| Digital-Input Cable Length | 30 m maximum |
| Power Inputs | 2 × 24 V DC, decoupled |
| Supply Range | 18 to 32 V DC SELV |
| Power Loss at 24 V DC | 20 W |
| Signaling Contact | 24 V DC / 100 mA maximum |
| Learnable Addresses | Up to 7,000 |
| Default Aging Time | 40 s |
| Switch Latency | 4 µs at stated test load |
Frequently Asked Questions
How many copper devices can connect directly to 6GK1105-2AB10?
Six RJ45 ports are available for 10/100 Mbit/s end devices or network segments.
Which fiber interface is used by 6GK1105-2AB10?
Two full-duplex 100Base-FX optical ports use BFOC connections.
How far can a multimode link run from 6GK1105-2AB10?
The documented maximum between suitable optical modules is 3,000 metres.
Can it act as a redundancy manager for a fiber ring on 6GK1105-2AB10?
Yes, it supports redundant OSM ring operation.
What are the eight digital inputs used for on 6GK1105-2AB10?
Their states can be read through management functions and can trigger configured traps, messages or log entries.
Which supply arrangement is required by 6GK1105-2AB10?
Provide one or two decoupled SELV feeds within the 18 to 32 V DC range.
What configuration should be saved before replacement of 6GK1105-2AB10?
Preserve the IP address, ring role, port settings, input actions, SNMP parameters and alarm destinations.
Compatibility & Ordering Notes
Compatibility Checklist
- Use compatible OSM/ESM optical modules and 100Base-FX multimode cabling.
- Maintain the documented ring-port assignment and redundancy-manager configuration.
- Wire only SELV supplies and observe the digital-input voltage ranges.
