Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6fx2001 5fn13 profinet absolute encoder-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6FX2001-5FN13 Single-Turn PROFINET Absolute Encoder

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Product Overview
  • Key Functions
  • Official Specifications
  • Frequently Asked Questions
  • Compatibility & Ordering Notes
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMOTION Motion Control Encoder

6FX2001-5FN13 Single-Turn PROFINET Absolute Encoder

Siemens 6FX2001-5FN13 is a single-turn absolute rotary encoder with a PROFINET interface, 16-bit resolution, synchronous flange, 6 mm shaft, radial M12 connections and a 10 to 30 V DC operating range.

At a Glance

Brand Siemens
Model 6FX2001-5FN13
Product Type Single-turn PROFINET absolute rotary encoder
Core Function Reports absolute shaft position directly over PROFINET IO
Application or Compatible Series SIMOTION and SIMATIC S7-1500(T) motion-control systems

Mechanical Fit

Match the synchronous flange, 6 mm shaft and coupling alignment to the installed machine.

Network Setup

Install the appropriate GSDML file and reproduce the PROFINET device name and telegram assignment.

Resolution Selection

Set the per-revolution resolution required by the project while preserving axis scaling and direction.

Product Overview

Siemens 6FX2001-5FN13 is a single-turn absolute rotary encoder with a PROFINET interface, 16-bit resolution, synchronous flange, 6 mm shaft, radial M12 connections and a 10 to 30 V DC operating range.

A unique angular value is available within one revolution without incremental homing. The encoder exchanges cyclic position data and diagnostics directly with the controller network. Engineering can select 13-bit or 16-bit resolution per revolution with the appropriate device description.

Ordering focus: confirm the synchronous flange, 6 mm shaft, radial M12 connections, supply range, function status, GSDML generation, telegram and axis scaling.
Key Functions

Absolute Single-Turn Position

A unique angular value is available within one revolution without incremental homing.

PROFINET IO Connection

The encoder exchanges cyclic position data and diagnostics directly with the controller network.

Configurable Resolution

Engineering can select 13-bit or 16-bit resolution per revolution with the appropriate device description.

Official Specifications
Maximum Single-Turn Resolution 16 bit
Configurable Resolution 13 or 16 bit per revolution
Operating Voltage 10 to 30 V DC
Flange Design Synchronous flange
Shaft Diameter 6 mm
Connector Type Radial M12
Function Status FS15
Maximum Ambient Temperature 85 °C
Number of Measured Turns 1
Legacy 13-Bit Measuring Steps 8192 increments per revolution
Legacy 13-Bit Value Range 8192
Legacy Absolute Data Length 13 bit
Encoder Measuring System Rotary
Encoder Operating Mode Cyclic absolute; SSI mode setting in SIMOTION
Supported PROFIdrive Telegrams 81, 82, 83, 84 and Siemens telegram 860
Frequently Asked Questions

Which GSDML package should I install for 6FX2001-5FN13?

Select the package that matches the encoder function status and the properties required by the existing project.

Can the resolution of 6FX2001-5FN13 be changed in engineering?

Yes, the PROFINET configuration can select thirteen-bit or sixteen-bit resolution per revolution.

How should 6FX2001-5FN13 be coupled to the machine shaft?

Use a correctly aligned coupling for the six-millimetre shaft and avoid excessive radial or axial load.

What device identity must be restored after replacing 6FX2001-5FN13?

Restore the PROFINET device name, network settings, telegram selection and axis assignment.

Is 6FX2001-5FN13 suitable for counting multiple revolutions?

No, it provides an absolute position within one mechanical revolution.

Which supply range is required by 6FX2001-5FN13?

Provide a regulated direct-current supply between ten and thirty volts.

How can 6FX2001-5FN13 be used as a handwheel input?

Connect it as a PROFINET encoder and assign a supported PROFIdrive telegram to the corresponding technology object.

Compatibility & Ordering Notes
Before ordering 6FX2001-5FN13: confirm the synchronous flange, 6 mm shaft, radial M12 connections, supply range, function status, GSDML generation, telegram and axis scaling.

Compatibility Checklist

  • Match the GSDML generation to the encoder function status already used in the controller project.
  • Reproduce the telegram, resolution, device name, direction and mechanical scaling before commissioning.
  • Check coupling alignment and keep the shaft free from excessive installation load.
Hot Selling Models
MASI67 56416
1007930000
FI25/4/03A
7000-40521-3490500
ABB CR-M4LC 1SVR405651R3200
3RU2136-4FB0
VMPA1-DPU-RS
5SY6206-7
VMPA1M1HJPI
3VU9131-3AA00
51301
3SE5112-0CE01
3VL9200-4PS30
CPE18-PRSEO-2
3RT1017-1BB44-3MA0 3RH1911-1HA12-3AA1

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.