Siemens 6FC5247-0AF12-1AA0 SINUMERIK Electronic Spindle Override Rotary Switch
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Connect the electronic supply to pin 5 and ground to pin 3.
- Use the MCP/MPP X30/X31 ribbon-cable arrangement.
- Fit the O-ring and tighten the shaft nut to 3 Nm.
- Align the pointer to zero and tighten the knob collet to 2 Nm.
6FC5247-0AF12-1AA0 SINUMERIK Electronic Spindle Override Rotary Switch
The 16-position electronic override switch with Gray-code output, a 5 V supply and the spindle/rapid-traverse dial set.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6FC5247-0AF12-1AA0 |
| Product Type | Electronic rotary operator control |
| Core Function | Selecting spindle and rapid-traverse override |
| Application | Compatible SINUMERIK MCP/MPP operator panels |
Sixteen settings
The 1x16G electronic version is assigned to spindle and rapid-traverse override.
Ribbon-cable connection
Electronic supply is on pin 5, with ground on pin 3.
Mechanical replacement
Central attachment, an O-ring and separate shaft/knob torques form the mounting arrangement.
Product Overview
6FC5247-0AF12-1AA0 provides electronic rotary selection for spindle and rapid-traverse override on compatible SINUMERIK operator panels. The 1x16G version uses Gray-code coding and includes the turquoise pointer and the assigned spindle and rapid-traverse dials.
The switch connects by ribbon cable and plug connector to the MCP/MPP X30/X31 arrangement. Its electronic supply-pin assignment differs from the mechanical rotary-switch variant, so both the wiring and mechanical replacement procedure matter during service.
Key Functions
Select the override setting
The electronic 1x16G rotary switch provides sixteen positions for spindle and rapid-traverse selection.
Transmit a coded position
Gray-code outputs pass the switch position through the ribbon-cable connector.
Fit the operator-panel cutout
Central attachment and an O-ring secure and seal the switch in the operator panel.
Official Specifications
| Switch settings | 16 positions; electronic 1x16G |
|---|---|
| Output coding | Gray code |
| Supply voltage | 4.75–5.5 V DC with ±100 mV tolerance |
| Current consumption | 25 mA typical; 75 mA maximum with all outputs loaded |
| Reverse-polarity protection | Up to 12 V |
| Short-circuit protection | Limited protection, maximum 50 ms |
| Output voltage levels | Low: below 0.6 V; high: above Vcc minus 1 V |
| Maximum output current | 10 mA |
| Connector allocation | Pin 3: ground; pin 5: Vcc; pins 1, 2 and 4 unconnected |
| Coded-output pin weights | Pins 6–10: 16, 8, 4, 2 and 1 |
| Approximate activation torque | 9 Ncm |
| Stop strength | 2.5 Nm |
| Service life | 50,000 cycles |
| Ambient temperature | Operation: −25 to +85 °C; storage: −40 to +135 °C |
| Vibration test | 1 g; 2–200 Hz; 1 octave/min for 133 min |
| Shock test | 10 g, 11 ms |
Frequently Asked Questions
Can I wire 6FC5247-0AF12-1AA0 using the supply pin of the mechanical override switch?
The electronic variant takes Vcc on pin 5, whereas the mechanical variant uses pin 4.
Which panel connections accept 6FC5247-0AF12-1AA0?
The switch connects to an MCP or MPP through X30/X31.
What tightening torque should I use for the shaft fastening nut of 6FC5247-0AF12-1AA0?
Tighten the shaft fastening nut to 3 Nm using the specified 14 mm wrench.
How should I align the pointer when installing the knob on 6FC5247-0AF12-1AA0?
Align the arrow point with position zero on the scale before tightening the knob.
What torque secures the rotary-knob collet on 6FC5247-0AF12-1AA0?
Tighten the collet nut with a torque spanner to 2 Nm.
Can I apply the 24 V panel supply directly to 6FC5247-0AF12-1AA0?
The electronic switch requires the specified 4.75–5.5 V DC supply.
What seal must be fitted before placing 6FC5247-0AF12-1AA0 in the panel cutout?
Fit the O-ring to the new switch shaft and maintain pressure on it while inserting the switch.