EN
Siemens SIMATIC S7-1500TF 6ES7516-3UN00-0AB0 CPU 1516TF-3 PN/DP
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Recommended Products
Overview
- Match the exact suffix and Siemens product family.
- Confirm the current project, firmware and hardware configuration.
- Verify power, communication, mounting and wiring requirements.
- Record settings and complete functional tests before production use.
6ES7516-3UN00-0AB0 CPU 1516TF-3 PN/DP fail-safe technology controller
Fail-safe technology CPU with 3 MB program memory, 7.5 MB data memory, PROFINET IRT, Ethernet and PROFIBUS DP.
At a Glance
| Manufacturer | Siemens |
|---|---|
| Article Number | 6ES7516-3UN00-0AB0 |
| Product Type | CPU 1516TF-3 PN/DP fail-safe technology controller |
| Core Function | Combines standard, safety and technology functions with PROFINET and PROFIBUS |
| Application / Compatible Series | Motion-control and fail-safe SIMATIC S7-1500 applications |
Product Overview
Siemens specifies this unit as a CPU 1516TF-3 PN/DP for applications combining standard control, fail-safe programming and advanced technology functions. Integrated PROFINET IRT, Ethernet and PROFIBUS DP support coordinated automation and motion tasks.
Commissioning requires the correct TIA Portal hardware support, an approved safety project, a SIMATIC Memory Card and verified network and drive configuration.
Key Functions
Fail-Safe Technology CPU
Runs standard, safety and technology tasks in one S7-1500 controller.
Multi-Network Integration
Provides PROFINET IRT, an additional Ethernet interface and PROFIBUS DP.
High-Speed Processing
Siemens specifies a 6 ns bit-operation time.
Official Specifications
| CPU Designation | CPU 1516TF-3 PN/DP |
|---|---|
| Program Work Memory | 3 MB |
| Data Work Memory | 7.5 MB |
| Bit Operation Time | 6 ns |
| PROFINET Interface | PROFINET IRT with 2-port switch |
| Additional Ethernet Interface | Integrated |
| PROFIBUS Interface | PROFIBUS DP |
| Motion Control | Technology functions integrated |
| Safety Programming | Fail-safe CPU |
| Memory Card | SIMATIC Memory Card required |
| Engineering Platform | STEP 7 and Safety in TIA Portal |
| Controller Family | S7-1500TF |
| Display | Integrated CPU display |
Frequently Asked Questions
Which TIA Portal components are needed for 6ES7516-3UN00-0AB0?
Use a compatible STEP 7 release together with the required Safety and technology options for the configured project.
How should PROFIsafe communication be checked on 6ES7516-3UN00-0AB0?
Verify safety addresses, device assignments, signatures, network timing and the approved safety acceptance records.
What motion-control data must be retained for 6ES7516-3UN00-0AB0?
Back up technology objects, axis parameters, encoder scaling, drive telegrams and synchronization settings.
Does 6ES7516-3UN00-0AB0 require removable memory?
A SIMATIC Memory Card is required; use the capacity and project contents defined for the installed configuration.
How are the network interfaces on 6ES7516-3UN00-0AB0 divided?
One interface supports PROFINET IRT through an integrated 2-port switch, with separate Ethernet and PROFIBUS DP connectivity also available.
What commissioning sequence is appropriate for 6ES7516-3UN00-0AB0?
Restore the approved project, validate standard I/O, check drives and technology objects, then complete the prescribed safety acceptance tests.
Can 6ES7516-3UN00-0AB0 be substituted by a standard CPU?
A standard CPU does not provide the same fail-safe and technology scope; reassess the hardware, licenses, program and safety concept before any change.
