Siemens SIMATIC ET 200SP 6ES7510-1DJ01-0AB0 CPU 1510SP-1 PN
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC ET 200SP
6ES7510-1DJ01-0AB0 CPU 1510SP-1 PN Central Processing Unit
Siemens 6ES7510-1DJ01-0AB0 is the SIMATIC ET 200SP CPU 1510SP-1 PN with separate program and data work memory, a PROFINET IRT interface with an integrated three-port switch and support for distributed automation tasks.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7510-1DJ01-0AB0 |
| Product Type | CPU 1510SP-1 PN central processing unit |
| Core Function | Executes the control program and coordinates distributed I/O over PROFINET IRT |
| Application or Compatible Series | SIMATIC ET 200SP distributed I/O systems |
Project Transfer
Preserve the TIA Portal hardware configuration, device name, IP settings and program before exchanging the CPU.
Interface Hardware
Install the required BusAdapter for the first two PROFINET ports and retain the existing network topology.
Memory Handling
Use the project SIMATIC Memory Card and verify its contents before the replacement CPU is commissioned.
Product Overview
Siemens 6ES7510-1DJ01-0AB0 is the SIMATIC ET 200SP CPU 1510SP-1 PN with separate program and data work memory, a PROFINET IRT interface with an integrated three-port switch and support for distributed automation tasks.
Dedicated program and data areas support compact controller applications without mixing the two memory allocations. The first interface provides PROFINET IRT through a three-port switch for controller and network communication. Multi-hot swapping and identification data support maintenance in ET 200SP installations.
Key Functions
Separated Work Memory
Dedicated program and data areas support compact controller applications without mixing the two memory allocations.
Integrated PROFINET Switching
The first interface provides PROFINET IRT through a three-port switch for controller and network communication.
Distributed System Service
Multi-hot swapping and identification data support maintenance in ET 200SP installations.
Official Specifications
| Hardware Functional Status | FS05 |
|---|---|
| Firmware Version | V2.9 |
| Program Work Memory | 100 KB |
| Data Work Memory | 750 KB |
| Maximum Plug-In Load Memory | 32 GB |
| SIMATIC Memory Card Slots | 1 |
| Bit Instruction Execution Time | 72 ns |
| PROFINET Interface Topology | Integrated 3-port switch |
| Rated Supply Voltage | 24 V DC |
| Permitted DC Supply Range | 19.2 to 28.8 V |
| Voltage-Failure Buffer Time | 10 ms |
| Rated Current Consumption | 0.6 A |
| Maximum Current Consumption | 0.9 A |
| Maximum Inrush Current | 4.7 A |
| Inrush Current Energy | 0.14 A²s |
| Backplane-Bus Infeed Power | 8.75 W |
| Typical Power Loss | 5.6 W |
| Minimum Isochronous OB6x Cycle | 625 µs over PROFINET |
Frequently Asked Questions
Which memory card should I prepare for 6ES7510-1DJ01-0AB0?
Install a SIMATIC Memory Card because the CPU requires one for operation and accepts plug-in load memory up to 32 GB.
Do I need a BusAdapter when installing 6ES7510-1DJ01-0AB0?
Yes, a suitable BusAdapter is required for the first two ports of the integrated PROFINET interface.
Can 6ES7510-1DJ01-0AB0 be used for isochronous PROFINET tasks?
Yes, isochronous operation is available over PROFINET with a minimum OB6x cycle of 625 microseconds.
Which TIA Portal version supports firmware V2.9 on 6ES7510-1DJ01-0AB0?
STEP 7 in TIA Portal V17 or later is required for engineering with firmware V2.9.
What supply should I connect to 6ES7510-1DJ01-0AB0?
Use a 24 V DC supply that remains within the permitted 19.2 to 28.8 V operating range.
Can modules be exchanged while 6ES7510-1DJ01-0AB0 is operating?
The CPU supports multi-hot swapping when the station and affected modules are configured for that maintenance procedure.
What should I retain before replacing 6ES7510-1DJ01-0AB0?
Retain the SIMATIC Memory Card, project program, hardware configuration, device name, IP parameters and network topology.
Compatibility & Ordering Notes
Compatibility Checklist
- Confirm the saved hardware configuration uses the exact CPU 1510SP-1 PN entry and matching firmware version.
- Retain the SIMATIC Memory Card, BusAdapter, PROFINET device name, IP parameters and port topology.
- Verify the 24 V DC supply and ET 200SP station configuration before restoring the project.