EN
Siemens SIMATIC S7-400 IM467 PROFIBUS DP Master Interface 6ES7467-5GJ02-0AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMATIC S7-400
6ES7467-5GJ02-0AB0 SIMATIC S7-400 IM467 PROFIBUS DP Master Interface
The IM467 is an S7-400 interface module that connects PROFIBUS DP field devices through an RS485 master interface.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7467-5GJ02-0AB0 |
| Product Type | RS485 PROFIBUS DP master interface module |
| Core Function | Adds a dedicated PROFIBUS DP master interface to an S7-400 station |
| Application or Compatible Series | S7-400 racks connecting distributed field devices over PROFIBUS DP |
Exact Identification
Match 6ES7467-5GJ02-0AB0 character by character and confirm the complete SIMATIC S7-400 IM467 PROFIBUS DP Master Interface designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The IM467 is an S7-400 interface module that connects PROFIBUS DP field devices through an RS485 master interface.
The module provides a separate master interface for distributed field devices. Its rack position and assigned DP network must match the hardware configuration. Cable, connector, address and termination settings must be preserved.
Key Functions
Additional DP Master
The module provides a separate master interface for distributed field devices.
S7-400 Rack Integration
Its rack position and assigned DP network must match the hardware configuration.
RS485 Fieldbus Connection
Cable, connector, address and termination settings must be preserved.
Official Specifications
| Interface Role | PROFIBUS DP master |
|---|---|
| Physical Layer | RS485 |
| Fieldbus Standard | PROFIBUS DP |
| Host System | SIMATIC S7-400 |
| Connected Equipment | PROFIBUS DP field devices |
| Maximum Transfer Rate | 12 Mbit/s |
| Fieldbus Connector | 9-pin Sub-D |
| Interface Count | 1 |
| Supply Form | Replacement part |
| Packaging Dimensions | 30.3 x 23.3 x 4.0 cm |
| Net Weight | 0.808 kg |
| Lifecycle Status | End of product lifecycle |
Frequently Asked Questions
What should an engineer verify about interface role before replacing 6ES7467-5GJ02-0AB0?
Confirm PROFIBUS DP master and compare it with the installed hardware, wiring and saved configuration before removal.
How should physical layer be matched when commissioning 6ES7467-5GJ02-0AB0?
Use RS485, then retain the matching interface, project and parameter settings during commissioning.
Is 6ES7467-5GJ02-0AB0 suitable when the project requires the stated fieldbus standard?
It supports PROFIBUS DP; the complete system must also meet the electrical, mechanical and engineering requirements.
What installation check applies to host system on 6ES7467-5GJ02-0AB0?
Verify SIMATIC S7-400, complete the associated wiring or configuration checks and record the result before startup.
Can 6ES7467-5GJ02-0AB0 be substituted without confirming connected equipment?
No. Confirm PROFIBUS DP field devices together with the connector arrangement and project settings before approving a replacement.
Why does maximum transfer rate matter when integrating 6ES7467-5GJ02-0AB0?
The required condition is 12 Mbit/s; a mismatch can prevent communication, correct control or safe operation.
What should be tested for fieldbus connector after installing 6ES7467-5GJ02-0AB0?
Test operation with 9-pin Sub-D, review diagnostics and complete the required functional and safety checks before service.
Compatibility & Ordering Notes
Compatibility Checklist
- Match interface role (PROFIBUS DP master) to the installed system.
- Verify physical layer (RS485) before changing wiring or configuration.
- Back up all available project, parameter and network data, then complete the required functional and safety checks.
