Siemens 6ES7421-1FH20-0AA0 SIMATIC S7-400 SM 421 16DI 120/230 V UC Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use 120/230 V UC field-signal arrangements.
- Keep positive DC ON signals within 80–264 V.
- Respect the four-channel potential groups.
- Limit two-wire AC sensor quiescent current to 5 mA.
- Budget 80 mA from the 5 V backplane and 12 W typical heat dissipation.
6ES7421-1FH20-0AA0 SIMATIC S7-400 SM 421 16DI 120/230 V UC Module
An isolated 16-channel SM 421 input module for 120/230 V UC signals, using IEC 61131 Type 2 input characteristics.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7421-1FH20-0AA0 |
| Product Type | SM 421 digital input module |
| Core Function | Acquiring high-voltage AC or DC discrete signals |
| Application | S7-400 I/O racks |
Universal-current inputs
The signal circuits accept the specified AC or positive and negative DC signal levels.
All-channel operation
All 16 inputs can be controlled simultaneously.
Defined response timing
AC and DC inputs have different maximum rising- and falling-edge delays.
Product Overview
6ES7421-1FH20-0AA0 acquires 16 discrete field signals in an S7-400 rack using 120/230 V UC input circuits and Type 2 input characteristics.
The module separates the input circuits in groups of four and isolates them from the backplane bus, while individual green indicators display the input states.
Key Functions
Accept AC or DC field states
The input circuits use rated 120/230 V UC signals with separately specified AC and DC switching thresholds.
Acquire all installed channels
All 16 digital inputs can be controlled simultaneously.
Show the field-input state
A green status indication is provided for the digital inputs, while the module does not provide diagnostic functions.
Official Specifications
| Digital Input Channels | 16, all simultaneously controllable |
|---|---|
| Rated Input Signal | 120/230 V UC; AC frequency 47–63 Hz |
| Input Characteristic | IEC 61131 Type 2 |
| OFF-State Input Voltage | 0–40 V AC or −40 to +40 V DC |
| ON-State Input Voltage | 74–264 V AC; 80–264 V DC or −264 to −80 V DC |
| Typical ON-State Input Current | At 120 V: 10 mA AC or 1.8 mA DC; at 230 V: 14 mA AC or 2 mA DC |
| Maximum Rising-Edge Delay | 20 ms AC; 15 ms DC |
| Maximum Falling-Edge Delay | 30 ms AC; 25 ms DC |
| Maximum Signal-Cable Length | 1000 m shielded; 600 m unshielded |
| Maximum Two-Wire Sensor Quiescent Current | 5 mA AC |
| Input Isolation Arrangement | Four-channel groups; isolated from backplane bus |
| Insulation Test Voltage | 1500 V AC |
| Maximum Backplane Current | 80 mA from 5 V DC |
| Typical Power Dissipation | 12 W |
| Input Status Display | Green LEDs |
| Dimensions (W × H × D) | 25 × 290 × 210 mm |
| Approximate Weight | 650 g |
Frequently Asked Questions
Can 6ES7421-1FH20-0AA0 accept both AC and DC switching signals?
The UC input circuits accept the specified AC and DC signal ranges.
Will 6ES7421-1FH20-0AA0 recognize 24 V DC as an ON signal?
The positive DC ON range starts at 80 V.
Can every channel of 6ES7421-1FH20-0AA0 be active at the same time?
All 16 inputs can be controlled simultaneously.
How are the input circuits of 6ES7421-1FH20-0AA0 grouped for isolation?
The inputs are isolated in groups of four and from the backplane bus.
What leakage limit applies to an AC two-wire sensor connected to 6ES7421-1FH20-0AA0?
The maximum permissible quiescent current is 5 mA.
Should I use 6ES7421-1FH20-0AA0 for a very short AC pulse?
Allow for maximum AC input delays of 20 ms on a rising edge and 30 ms on a falling edge.
Can 6ES7421-1FH20-0AA0 report channel diagnostic faults?
The module has input-state indicators but no diagnostic functions.