EN
Siemens SIMATIC S7-300 FM 352 Electronic Cam Controller 6ES7352-1AH01-0AE0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens • SIMATIC S7-300 FM 352
6ES7352-1AH01-0AE0 SIMATIC S7-300 FM 352 Electronic Cam Controller
The FM 352 is an S7-300 electronic cam controller that evaluates position feedback and controls configured cam outputs independently of the CPU scan.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7352-1AH01-0AE0 |
| Product Type | Electronic cam controller function module |
| Core Function | Generates position-dependent switching signals from encoder feedback and configured cam tracks |
| Application or Compatible Series | S7-300 machines requiring electronic cam control and encoder-synchronized outputs |
Exact Identification
Match 6ES7352-1AH01-0AE0 character by character and confirm the complete SIMATIC S7-300 FM 352 Electronic Cam Controller designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The FM 352 is an S7-300 electronic cam controller that evaluates position feedback and controls configured cam outputs independently of the CPU scan.
Configured cam tracks generate repeatable position-dependent switching. The module evaluates the connected position encoder. Parameters and diagnostics are managed in the S7-300 project.
Key Functions
Electronic Cam Control
Configured cam tracks generate repeatable position-dependent switching.
Encoder Feedback
The module evaluates the connected position encoder.
S7-300 Integration
Parameters and diagnostics are managed in the S7-300 project.
Official Specifications
| Supply Voltage | 24 V DC |
|---|---|
| Permissible Supply Range | 20.4 to 28.8 V DC |
| Backplane Bus Current | 100 mA maximum |
| Power Dissipation | 8.1 W typical |
| Field Supply Current | 200 mA maximum from L+ for encoders and digital I/O |
| Encoder Supply Outputs | 5.2 V / 300 mA and 24 V / 300 mA |
| Encoder Input Types | Incremental encoder or absolute encoder |
| Symmetrical Encoder Interface | 5 V RS-422, up to 1 MHz |
| Asymmetrical Encoder Interface | 24 V; up to 50 kHz at 25 m or 25 kHz at 100 m |
| Digital Inputs | 4 inputs, 24 V DC |
| Digital Outputs | 13 outputs, 24 V DC / 0.5 A, short-circuit proof |
| Output Switching Frequency | 500 Hz maximum with resistive load; 0.5 Hz maximum with inductive load |
| Cam Capacity | Up to 128 cams |
| Cam Processing Cycle | 20.48 µs for 16 cams to 163.84 µs for 128 cams |
| Module Checkback Update | 4 ms; 1 ms with pulse-measuring system |
| Module Dimensions | 80 × 125 × 120 mm |
| Device Weight | Approximately 530 g |
Frequently Asked Questions
What machine data should be preserved for cam controller 6ES7352-1AH01-0AE0?
Save every cam track, encoder setting, reference point and output assignment.
How is position information supplied to cam controller 6ES7352-1AH01-0AE0?
Connect the configured encoder using the validated signal type and wiring.
Which installed configuration should be recorded before replacing cam controller 6ES7352-1AH01-0AE0?
Record the configured addresses, wiring assignments, parameters, firmware and neighboring hardware before removal.
What identification must match when selecting cam controller 6ES7352-1AH01-0AE0?
Match the complete article number, hardware revision and every option used by the installed system.
How should technicians handle cam controller 6ES7352-1AH01-0AE0?
Isolate the affected equipment and use grounded electrostatic-discharge precautions throughout the exchange.
Which checks are required after installing cam controller 6ES7352-1AH01-0AE0?
Verify power, diagnostics, communication, field signals and the complete approved machine or plant function.
When should a visually similar unit replace cam controller 6ES7352-1AH01-0AE0?
Use a visually similar unit only after engineering confirms identical electrical, mechanical and software compatibility.
Compatibility & Ordering Notes
Compatibility Checklist
- Match the encoder electrical interface and resolution.
- Restore the approved cam table and reference data.
- Test all switching points at safe speed.
