Siemens 6ES7322-1BF01-0AA0 SM 322 Digital Output Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the matching 20-pin front connector.
- Keep total current at or below 4 A for each group of four outputs.
- Do not parallel output channels to increase the available load current.
- Use channel status indicators for local checks, because diagnostic alarms are not provided.
6ES7322-1BF01-0AA0 SM 322 Digital Output Module
Isolated SM 322 with eight 24 V DC, 2 A outputs, two groups of four channels and a 20-pin front connection.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7322-1BF01-0AA0 |
| Product Type | Eight-channel transistor output module |
| Core Function | Switching DC field loads |
| Application | S7-300 output expansion |
DC actuator switching
Each output has a rated signal-1 current of 2 A.
Electronic protection
Electronic short-circuit protection has a typical 3 A response threshold.
Channel state indication
A green status LED is provided for each output, supporting local checks during commissioning.
Product Overview
6ES7322-1BF01-0AA0 switches DC actuators from an S7-300 station through eight electronically protected outputs.
The channels are arranged in groups of four, with a 4 A maximum total output current per group; the per-channel 2 A rating must therefore be considered together with the group limit.
Key Functions
DC actuator switching
Each output has a rated signal-1 current of 2 A.
Electronic protection
Electronic short-circuit protection has a typical 3 A response threshold.
Channel state indication
A green status LED is provided for each output, supporting local checks during commissioning.
Official Specifications
| Load Supply Range | 20.4–28.8 V DC, 24 V nominal |
|---|---|
| Rated Output Current | 2 A per channel |
| Maximum Output Current per Group | 4 A per group of four outputs |
| Maximum Supply Consumption | 60 mA from L+ without load; 40 mA from the 5 V backplane |
| Typical Power Loss | 6.8 W |
| Short-Circuit Response Threshold | 3 A typical |
| Minimum High-State Voltage | L+ minus 0.8 V |
| Minimum Load Current | 5 mA |
| Maximum Off-State Residual Current | 0.5 mA |
| Maximum Resistive-Load Output Delay | 100 µs on; 500 µs off |
| Maximum Switching Frequencies | 100 Hz resistive; 0.5 Hz inductive; 10 Hz lamp load |
| Maximum Lamp Load | 10 W |
| Load Resistance Range | 12 Ω–4 kΩ |
| Maximum Cable Length | 1,000 m shielded; 600 m unshielded |
| Front Connector | 20-pin |
| Isolation Test Voltage | 500 V DC |
| Dimensions and Approximate Weight | 40 × 125 × 120 mm; 190 g |
Frequently Asked Questions
Can all four outputs in one group of 6ES7322-1BF01-0AA0 each carry 2 A?
The group total is limited to 4 A, so four simultaneous 2 A loads would exceed the group rating.
Which front connector should I use with 6ES7322-1BF01-0AA0?
The module requires a 20-pin front connector.
Can I parallel outputs on 6ES7322-1BF01-0AA0 to obtain more current?
Parallel connection for increasing current is not permitted.
How fast can 6ES7322-1BF01-0AA0 switch a resistive load?
Resistive loads can be switched at up to 100 Hz.
Will 6ES7322-1BF01-0AA0 report a broken load wire to the CPU?
The module has no diagnostic function or diagnostic alarm for a wire break.
How can I inspect the output states of 6ES7322-1BF01-0AA0 locally?
A green status indicator is provided for each output channel.
What is the longest shielded output cable for 6ES7322-1BF01-0AA0?
A shielded output cable can be up to 1,000 m long.