EN
Siemens SIMATIC S7-300 CPU 317F-2 DP 6ES7317-6FF04-0AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIMATIC S7-300 - Fail-safe programmable logic controller CPU
6ES7317-6FF04-0AB0 SIMATIC S7-300 CPU 317F-2 DP
Siemens specifies a CPU 317F-2 DP with 1.5 MB work memory, two integrated RS485 interfaces and support for S7 Distributed Safety.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7317-6FF04-0AB0 |
| Product Type | Fail-safe programmable logic controller CPU |
| Core Function | Safety-related PLC processing with two MPI/PROFIBUS DP interfaces |
| Application or Compatible Series | SIMATIC S7-300 and S7 Distributed Safety systems |
Product Overview
Siemens specifies a CPU 317F-2 DP with 1.5 MB work memory, two integrated RS485 interfaces and support for S7 Distributed Safety.
Official Siemens documentation identifies the product for SIMATIC S7-300 and S7 Distributed Safety systems. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
Fail-Safe Automation
The controller is engineered with the S7 Distributed Safety option for safety-related applications.
Dual PROFIBUS Connectivity
Two MPI/DP-capable RS485 interfaces support master and slave configurations.
Micro Memory Card Operation
A SIMATIC Micro Memory Card is required for operation.
Official Specifications
| Hardware Functional Status | 01 |
|---|---|
| Firmware Version | V3.3 |
| Engineering Software | STEP 7 V5.5 SP1 or higher with Distributed Safety |
| Supply Range | 19.2 to 28.8 V DC |
| Typical Power Loss | 4.5 W |
| Work Memory | 1.5 MB |
| Load Memory | Micro Memory Card required; up to 8 MB |
| Bit / Word Operation Time | 0.025 µs / 0.03 µs |
| Fixed / Floating-Point Operation Time | 0.04 µs / 0.16 µs |
| I/O Address Area | 8,192 bytes inputs / 8,192 bytes outputs |
| Interfaces | 2 x integrated RS485 |
| Maximum Interface Rate | 12 Mbit/s |
| Retentive Data Area | Maximum 256 KB |
| Protection Rating | IP20 |
| Dimensions | 40 x 125 x 130 mm |
| Approximate Weight | 360 g |
Frequently Asked Questions
Which control platform accepts 6ES7317-6FF04-0AB0?
This fail-safe CPU is intended for the SIMATIC S7-300 automation platform.
How much work memory is available for 6ES7317-6FF04-0AB0?
The controller provides 1.5 MB of integrated work memory.
Is a memory card required to start 6ES7317-6FF04-0AB0?
A SIMATIC Micro Memory Card is required for operation.
What networks can be connected directly to 6ES7317-6FF04-0AB0?
The CPU provides one MPI/DP interface and a second PROFIBUS DP master/slave interface.
Which safety engineering environment is used with 6ES7317-6FF04-0AB0?
Fail-safe applications are engineered with S7 Distributed Safety V5.2 SP1 or a compatible later release.
What should be preserved before replacing 6ES7317-6FF04-0AB0?
The approved safety project, hardware configuration and memory-card contents should be backed up and retained.
How should technicians verify a 6ES7317-6FF04-0AB0 replacement before wiring it?
The complete article number, CPU 317F-2 DP designation and both bus-interface assignments should match the existing installation.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7317-6FF04-0AB0
- Match SIMATIC S7-300 CPU 317F-2 DP and the full article number character by character.
- Verify firmware version: V3.3.
- Confirm work memory: 1.5 MB.
- Preserve the approved settings and connection records used in SIMATIC S7-300 and S7 Distributed Safety systems.
