EN
Siemens SIMATIC S7-200 6ES7214-2BD23-0XB8 CPU 224XP AC/DC/Relay Compact Controller
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use only compatible S7-200 expansion modules and programming tools.
- Preserve both communication-port configurations and the full I/O address map.
- Validate relay-load protection and analog scaling before resuming automatic operation.
SIEMENS · SIMATIC S7-200
6ES7214-2BD23-0XB8 CPU 224XP AC/DC/Relay Compact Controller
The 6ES7214-2BD23-0XB8 CPU 224XP combines an AC power supply, fourteen digital inputs, ten relay outputs, two analog inputs and one analog output in a compact S7-200 controller.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7214-2BD23-0XB8 |
| Product Type | Compact PLC with integrated digital and analog I/O |
| Core Function | Executes machine-control logic and connects field I/O through onboard relay, analog and serial interfaces |
| Application or Compatible Series | SIMATIC S7-200 installations engineered with STEP 7-Micro/WIN |
Exact Identification
Match 6ES7214-2BD23-0XB8 character by character before replacement.
Interface Check
Confirm the installed supply, terminals, network and field wiring.
Project Backup
Preserve the validated configuration and application data before exchange.
Product Overview
The 6ES7214-2BD23-0XB8 CPU 224XP combines an AC power supply, fourteen digital inputs, ten relay outputs, two analog inputs and one analog output in a compact S7-200 controller.
Digital and analog channels are built into the controller for compact machine applications. Two PPI or Freeport interfaces support programming and serial communication tasks. Approved S7-200 expansion modules can extend the onboard I/O configuration.
Key Functions
Integrated Mixed I/O
Digital and analog channels are built into the controller for compact machine applications.
Dual Serial Communication
Two PPI or Freeport interfaces support programming and serial communication tasks.
Expandable S7-200 Platform
Approved S7-200 expansion modules can extend the onboard I/O configuration.
Official Specifications
| Input Supply | 120 to 240 V AC |
|---|---|
| Digital Inputs | 14 at 24 V DC |
| Relay Outputs | 10 |
| Analog Inputs | 2 |
| Analog Outputs | 1 |
| Integrated Communication Ports | 2 |
| Communication Modes | PPI and Freeport |
| Program Memory | 12 KB or 16 KB by configured firmware generation |
| Data Memory | 10 KB |
| Typical Power Loss | 11 W |
| Maximum Sensor-Supply Current | 660 mA |
| Maximum Expansion-Bus Current | 280 mA |
| Dimensions | 140 × 80 × 62 mm |
| Approximate Weight | 440 g |
| Programming Environment | STEP 7-Micro/WIN |
| Integrated High-Speed Functions | High-speed counters and pulse functions according to CPU 224XP configuration |
Frequently Asked Questions
Which supply is required for 6ES7214-2BD23-0XB8?
Use a 120 to 240 V AC source and wire the 24 V DC input circuits separately as specified.
How many onboard I/O channels are available on 6ES7214-2BD23-0XB8?
The controller has fourteen digital inputs, ten relay outputs, two analog inputs and one analog output.
Which software should be used to program 6ES7214-2BD23-0XB8?
Use a STEP 7-Micro/WIN release that supports the installed CPU firmware.
Can 6ES7214-2BD23-0XB8 communicate through two serial ports?
Yes, two integrated ports can be configured for PPI or supported Freeport protocols.
What should be backed up before replacing 6ES7214-2BD23-0XB8?
Save the Micro/WIN project, data block, network addresses, communication settings and analog scaling.
How should relay loads be checked for 6ES7214-2BD23-0XB8?
Verify the voltage, current, load category and external suppression for every output circuit.
What must be tested after commissioning 6ES7214-2BD23-0XB8?
Check digital and analog I/O, serial communication, expansion modules and the complete machine sequence.
