Siemens 6ES7194-4BC00-0AA0 ET 200pro CM PM-E Direct Connection Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the connection module to the PM-E DC24V power module and its mounted bus-module assembly.
- Connect the incoming and forwarded 2L+ load supply to the correct X01 terminals.
- Keep the internal 2L+ busbar load within 10 A even when the feed circuit is rated at 16 A.
- Prepare the specified flexible conductors, ferrules and 11 mm stripping length.
- Tighten supply terminals, M20 glands and module fastening screws to their respective torque values.
6ES7194-4BC00-0AA0 ET 200pro CM PM-E Direct Connection Module
A direct screw-terminal load-supply connection module with up to two M20 cable glands for ET 200pro PM-E power modules.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7194-4BC00-0AA0 |
| Product Type | CM PM-E Direct connection module |
| Core Function | Feeds and loops the 2L+ load supply |
| Application | ET 200pro PM-E DC24V power modules |
Direct load wiring
Screw terminals connect the incoming 2L+ load supply.
Feed-through terminals
Additional terminals provide a route for looping the load supply onward.
M20 cable entries
Up to two M20 glands accommodate the supply and forwarding cables.
Product Overview
6ES7194-4BC00-0AA0 connects the 2L+ load voltage to an ET 200pro PM-E power module through direct screw terminals.
Additional terminals allow the load supply to be looped through, and the connection module plugs into the power module and is secured by its captive screws.
Key Functions
Direct 2L+ load-voltage feed
The connection module brings the incoming load supply to the PM-E through screw terminals rather than a circular supply connector.
Load-supply loop-through
Additional X01 terminals carry the outgoing load-voltage cable, allowing incoming and forwarded supply wiring to share one connection module.
Glanded and mechanically secured wiring
Two M20 cable entries and the module fastening screws provide the cable route and attachment to the PM-E assembly, with three inscription labels for identification.
Official Specifications
| Load-supply Connection | Direct screw terminals for 2L+ |
|---|---|
| Maximum Load-supply Feed Current | 16 A |
| Internal 2L+ Busbar Current Limit | 10 A |
| Cable Entries | Up to 2 × M20 cable glands |
| Flexible Conductor Cross-section | 0.14–2.5 mm², with or without ferrules |
| Conductors per Terminal | 1 |
| Conductor Stripping Length | 11 mm |
| Supply-terminal Tightening Torque | 0.5–0.7 N·m |
| M20 Gland Tightening Torque | 3 N·m |
| Module Fastening Torque | 1.5 N·m |
| Inscription Labels | 3 |
| Dimensions (W × H × D) | 45 × 130 × 100 mm |
| Approximate Weight | 140 g |
Frequently Asked Questions
Can 6ES7194-4BC00-0AA0 forward the load supply to another cable?
Additional terminals allow the incoming 2L+ load supply to be looped through to an outgoing cable.
Does the 16 A feed rating of 6ES7194-4BC00-0AA0 permit 16 A on the internal 2L+ busbar?
The internal ET 200pro 2L+ busbar remains limited to 10 A despite the 16 A feed rating.
Which cable glands are used with 6ES7194-4BC00-0AA0?
The connection module accommodates up to two M20 cable glands for incoming and loop-through cables.
What conductor preparation is required for 6ES7194-4BC00-0AA0?
Use flexible conductors of 0.14–2.5 mm² and strip their insulation to 11 mm.
How tightly should I secure supply wires in 6ES7194-4BC00-0AA0?
Tighten the supply-terminal screws to 0.5–0.7 N·m.
Where is the replaceable load-supply fuse in an assembly using 6ES7194-4BC00-0AA0?
The replaceable fuse and spare belong to the PM-E power module rather than the connection module.
How do I secure 6ES7194-4BC00-0AA0 after completing its wiring?
Plug it into the power module and tighten its two fastening screws evenly to 1.5 N·m.