Siemens 6ES7193-7AXX0-0AA0 SIMATIC ET 200iSP Terminating Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Mount after the final terminal module.
- Latch the assembly together and tighten the front rail-fixing screw.
- Use a reserve module when planning future expansion.
- Isolate the PS supply before removal.
6ES7193-7AXX0-0AA0 SIMATIC ET 200iSP Terminating Module
A right-end terminating module with rail engagement, a front fixing screw and a removable slot cover for the ET 200iSP station.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7193-7AXX0-0AA0 |
| Product Type | Station termination accessory |
| Core Function | Closing and mechanically securing the module lineup |
| Application | ET 200iSP distributed I/O stations |
Right-end station closure
The accessory attaches after the last terminal module.
Mechanical retention
The front screw secures the station against sideways movement on the rail.
Integrated slot cover
A removable cover is retained in the side bracket.
Product Overview
6ES7193-7AXX0-0AA0 completes the right-hand end of the ET 200iSP module assembly.
The terminating module accompanies the TM-IM/EM and TM-IM/IM terminal-module arrangements and includes a removable cover for the final unused slot.
Key Functions
Close the module assembly
The terminator latches onto the last terminal module at the right-hand end of the station.
Secure the rail installation
A front fixing screw prevents sideways movement of the station on its mounting rail.
Cover the last unused slot
The integrated removable cover closes a final spare slot when future expansion is not planned.
Official Specifications
| Mounting-Rail Engagement | Hook-on mounting with pivot-in seating |
|---|---|
| Terminal-Module Connection | Latching interface to the adjacent terminal module |
| Rail-Fixing Hardware | One front-mounted fixing screw |
| Fixing-Screw Tightening Torque | 0.8–1.1 Nm |
| Fixing-Screw Tool | Flat-blade screwdriver, 4.5 mm blade width |
| Slot-Cover Construction | Removable cover integrated into the terminating module |
| Slot-Cover Retention | Integral bracket on the right-hand side |
| Slot-Cover Release Access | Lower opening for screwdriver leverage |
Frequently Asked Questions
Where should I fit 6ES7193-7AXX0-0AA0 in an ET 200iSP station?
Fit the terminator on the rail immediately to the right of the last terminal module.
Does 6ES7193-7AXX0-0AA0 need its front fixing screw tightened?
The screw must secure the station against sideways movement using a tightening torque of 0.8 to 1.1 Nm.
Which screwdriver do I need to install 6ES7193-7AXX0-0AA0?
Use a flat-blade screwdriver with a 4.5 mm blade.
Must I isolate the station before removing 6ES7193-7AXX0-0AA0?
Switch off the PS supply voltage or remove the power supply before uninstalling the terminator.
Should I use the cover from 6ES7193-7AXX0-0AA0 when I plan to add another electronics module later?
Use a reserve module for planned future expansion and a slot cover when expansion is not planned.
Can I replace the slot cover associated with 6ES7193-7AXX0-0AA0 during operation?
Replacing the slot cover with an electronics module during operation causes a station failure.
Can the station operate normally without 6ES7193-7AXX0-0AA0 fitted?
Without the terminating module the station is not ready for operation, EMC is not guaranteed and withdrawing an electronics module causes station failure.