EN
Siemens 6ES7193-4CA80-0AA0 SIMATIC ET 200S TM-E15N26-A1 FastConnect Universal Terminal Base
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Allow for the 202 mm base height.
- Use 0.5–1.5 mm² conductors without ferrules.
- Preserve the inserted electronic module’s signal assignment.
- Keep AUX1 continuous and correctly assigned.
6ES7193-4CA80-0AA0 SIMATIC ET 200S TM-E15N26-A1 FastConnect Universal Terminal Base
A 15 mm FastConnect universal base with a 2x6 terminal arrangement, continuous AUX1 and four auxiliary-potential access points.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7193-4CA80-0AA0 |
| Product Type | Universal terminal base |
| Core Function | Field signal and auxiliary-potential wiring |
| Application | ET 200S 15 mm electronic modules |
Insulation-displacement wiring
FastConnect terminals accept the specified unstripped installation conductors.
Auxiliary potential access
AUX1 is available at A3, A4, A7 and A8.
Extended base height
The FastConnect construction is 202 mm high and 43 mm deep.
Product Overview
6ES7193-4CA80-0AA0 provides the FastConnect universal wiring base for 15 mm ET 200S electronic modules.
The electronic module assigns signal terminals 1 through 8, while the continuous AUX1 bus connects to four additional terminal positions for the chosen auxiliary potential.
Key Functions
Connect the eight signal terminals
The fitted electronic module determines the functions at terminals 1 through 8.
Distribute an auxiliary potential
The continuous AUX1 bus is accessible at terminal points A3, A4, A7 and A8.
Simplify conductor preparation
FastConnect wiring makes the field connections without stripping individual conductors.
Official Specifications
| Terminal arrangement | 2 × 6 positions |
|---|---|
| Field-wire connection technology | FastConnect insulation displacement |
| Signal-terminal numbering | 1–8 |
| AUX1 terminal access | A3, A4, A7 and A8 on a continuous bus |
| Solid and unprepared flexible conductor range | 0.5–1.5 mm² |
| Prepared flexible conductors with ferrules | Not permitted for FastConnect termination |
| Conductors per connection | 1 |
| Conductor preparation | No stripping required |
| Dimensions (W × H × D) | 15 × 202 × 43 mm |
| Approximate base weight | 95 g |
Frequently Asked Questions
Should I strip individual conductors before inserting them into 6ES7193-4CA80-0AA0?
No, the FastConnect connection method is designed for unstripped conductors.
Can I use a ferruled flexible conductor on 6ES7193-4CA80-0AA0?
No, ferruled flexible conductors are not permitted for the FastConnect terminal connection.
Where can I access AUX1 on 6ES7193-4CA80-0AA0?
The AUX1 potential is accessible at A3, A4, A7 and A8.
Will 6ES7193-4CA80-0AA0 fit the same 157 mm height envelope as the screw-terminal universal base?
No, the FastConnect universal base has a height of 202 mm.
Can two wires share one FastConnect connection on 6ES7193-4CA80-0AA0?
No, each FastConnect connection accepts one conductor.
What wire size is permitted for unprepared flexible conductors on 6ES7193-4CA80-0AA0?
The permitted range is 0.5–1.5 mm².
Who determines the function of signal terminal 6 on 6ES7193-4CA80-0AA0?
The installed electronic module determines the assignment of signal terminals 1 through 8.
