Siemens 6ES7193-0CC10-0XA0 SIMATIC ET 200B TB6/AC Terminal Block
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the installed ET 200B AC electronics article.
- Keep the supply within 85–264 V AC.
- Use the pin assignment for the selected AC or relay electronics block.
- Provide external isolation and protect the field circuits appropriately.
- Preserve the station’s bus address and PROFIBUS termination configuration.
6ES7193-0CC10-0XA0 SIMATIC ET 200B TB6/AC Terminal Block
A TB6/AC base with two-wire screw connections, a 120/230 V AC supply and galvanic separation between the electronics and PROFIBUS DP.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7193-0CC10-0XA0 |
| Product Type | Station wiring base |
| Core Function | Connects AC electronics to stationary field wiring |
| Application | ET 200B AC digital I/O stations |
AC station base
Supports the ET 200B AC digital electronics arrangement.
Stationary wiring
Field conductors remain on the base when servicing the electronics.
Screw connections
Three-tier terminals organize the field connections.
Product Overview
6ES7193-0CC10-0XA0 is the TB6/AC terminal base for compatible ET 200B digital AC electronics blocks.
The base carries the supply and field wiring, with two-wire screw connections and a 235 mm-wide installation format; its AC arrangement differs from the DC TB variants.
Key Functions
AC electronics integration
The TB6/AC base accepts the assigned AC input, AC output, relay-output and mixed AC electronics blocks.
Field-wiring retention
The terminal block provides the stationary wiring side of the distributed I/O assembly.
Bus-side electrical separation
The electronics block and PROFIBUS DP side are galvanically separated in the specified assembly.
Official Specifications
| Rated supply | 120/230 V AC |
|---|---|
| Permissible supply range | 85–264 V AC, including ripple |
| Current consumption | 60 mA typical; 210 mA maximum |
| Terminal construction | Two-wire screw connections on a three-tier base |
| Digital connection capacity | 16-channel base |
| Potential separation | Electronics block to PROFIBUS DP |
| Unferruled signal conductor | 0.14–2.5 mm² |
| Ferruled signal conductor | Up to 1.5 mm² |
| Operating temperature | 0–60 °C |
| Dimensions (W × H × D) | 235 × 130 × 59 mm |
| Approximate weight | 800 g |
Frequently Asked Questions
Which ET 200B electronics can I install on 6ES7193-0CC10-0XA0?
The TB6/AC base is assigned to the ET 200B AC input, AC output, relay-output and mixed AC electronics variants.
Does 6ES7193-0CC10-0XA0 have a STOP/RUN switch?
The TB6/AC terminal block has no STOP/RUN switch.
Can I supply 6ES7193-0CC10-0XA0 with 24 V DC?
The base is the AC version and requires its specified 120/230 V AC supply arrangement.
How much cabinet width should I allow for 6ES7193-0CC10-0XA0?
Allow 235 mm for the terminal-block width and additional space for wiring and the selected bus connector.
Are the field connections on 6ES7193-0CC10-0XA0 spring terminals?
This version uses screw terminals for the field wiring.
Is the bus side of 6ES7193-0CC10-0XA0 separated from the electronics supply?
Galvanic separation is provided between the electronics block and PROFIBUS DP.
Can I replace the electronics without moving every field wire from 6ES7193-0CC10-0XA0?
The field wiring stays on the terminal base while the compatible electronics block is replaced.