Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7151 8ab00 0ab0 simatic et200s im151 8 pn dp cpu-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens SIMATIC ET 200S 6ES7151-8AB00-0AB0 IM 151-8 PN/DP CPU

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview

Siemens · SIMATIC ET 200S

6ES7151-8AB00-0AB0 IM 151-8 PN/DP CPU

Siemens 6ES7151-8AB00-0AB0 is the hardware-version-01 IM 151-8 PN/DP CPU with firmware V2.7.0, 128 KB work memory and an integrated three-port PROFINET interface.

At a Glance

Brand Siemens
Model 6ES7151-8AB00-0AB0
Product Type PN/DP CPU Interface Module
Core Function Executes local S7 control while coordinating networked I/O
Application or Compatible Series SIMATIC ET 200S distributed I/O systems

Exact Hardware Generation

Match hardware version 01 and firmware V2.7 because later IM 151-8 article numbers have different memory and performance values.

Memory and Engineering

Prepare STEP 7 V5.4 SP4 or later and install a suitable SIMATIC Micro Memory Card before commissioning.

Network Architecture

Plan the three-port PROFINET topology and add the dedicated DP master module only when PROFIBUS DP is required.

Product Overview

Siemens 6ES7151-8AB00-0AB0 is the hardware-version-01 IM 151-8 PN/DP CPU with firmware V2.7.0, 128 KB work memory and an integrated three-port PROFINET interface.

The CPU executes the user program within the ET 200S station and coordinates the connected I/O. An integrated switch supports PROFINET IO controller communication through three RJ45 ports. A separate DP master module adds PROFIBUS DP master operation and S7 routing.

Ordering focus: confirm the complete article number, hardware version 01, firmware V2.7.0, STEP 7 release, SIMATIC Micro Memory Card, PROFINET topology, supply and optional DP master module.

Key Functions

Local S7 Program Execution

The CPU executes the user program within the ET 200S station and coordinates the connected I/O.

Three-Port PROFINET Controller

An integrated switch supports PROFINET IO controller communication through three RJ45 ports.

Optional PROFIBUS Extension

A separate DP master module adds PROFIBUS DP master operation and S7 routing.

Official Specifications

Hardware and Firmware Version Hardware 01; firmware V2.7.0
Engineering Software STEP 7 V5.4 SP4 or later
Work Memory 128 KB, not expandable
Retentive Data-Block Capacity 64 KB
Load Memory SIMATIC Micro Memory Card, 8 MB maximum
Memory-Card Data Retention At least 10 years after final programming
Instruction Execution Times Bit 0.1 µs, word 0.2 µs, fixed-point 2 µs and floating-point 3 µs
Available S7 Counters and Timers 256 counters and 256 timers
S7 Timer Range 10 ms to 9990 s
Maximum Address Area 2048 bytes for inputs and 2048 bytes for outputs
Process Image Adjustable from byte 0 to 2047; preset byte 0 to 127
Ethernet Connection Three RJ45 ports with an internal PROFINET switch
IRT Capability PROFINET V2.2 IRT with high flexibility from firmware V2.7
Open IE Communication Eight access points for TCP and ISO-on-TCP, with up to 8192-byte data length where specified
Web-Server Clients Five HTTP clients
Optional PROFIBUS DP Capacity Up to 32 DP slaves at up to 12 Mbaud through 6ES7138-4HA00-0AB0
Time Synchronization NTP client on PROFINET; DP time master or slave with the DP master module
Diagnostics Buffer 500 entries maximum, with the last 100 retained after power cycling
Supply and Consumption 20.4 to 28.8 V DC; typically 320 mA at 24 V or 380 mA at 20 V; 5.5 W typical loss
Dimensions and Weight 120 × 119.5 × 75 mm; approximately 320 g

Frequently Asked Questions

Which STEP 7 version is required for 6ES7151-8AB00-0AB0?

Use STEP 7 V5.4 SP4 or a later compatible release for hardware version 01 and firmware V2.7.

Does 6ES7151-8AB00-0AB0 require a memory card?

A SIMATIC Micro Memory Card is required, and the verified maximum load-memory capacity is 8 MB.

Can 6ES7151-8AB00-0AB0 be upgraded to firmware V3.2?

No, this hardware generation cannot be upgraded to firmware V3.2 or later.

Which network ports should form a redundancy ring on 6ES7151-8AB00-0AB0?

Use P1 R and P2 R as media-redundancy ring ports, while P3 remains outside the redundancy domain.

How is PROFIBUS DP added to 6ES7151-8AB00-0AB0?

Add DP master module 6ES7138-4HA00-0AB0, which permits up to 32 DP slaves at up to 12 Mbaud.

What I/O address capacity is available on 6ES7151-8AB00-0AB0?

The maximum configured address space is 2048 bytes for inputs and 2048 bytes for outputs.

Can a later CPU replace 6ES7151-8AB00-0AB0 in an existing STEP 7 project?

A 6ES7151-8AB01-0AB0 unit can be configured as the earlier version in STEP 7 V5.4, but its V3.2 functions are then unavailable.

Compatibility & Ordering Notes

Before ordering 6ES7151-8AB00-0AB0: confirm the complete article number, hardware version 01, firmware V2.7.0, STEP 7 release, SIMATIC Micro Memory Card, PROFINET topology, supply and optional DP master module.

Compatibility Checklist

  • Match order number 6ES7151-8AB00-0AB0, hardware version 01 and firmware V2.7.0.
  • Use STEP 7 V5.4 SP4 or a later compatible engineering release.
  • Install a SIMATIC Micro Memory Card no larger than the verified 8 MB limit.
  • Supply 20.4 to 28.8 V DC and include suitable external circuit protection.
  • Use P1 R and P2 R for an MRP ring and keep P3 outside the ring domain.
  • Add 6ES7138-4HA00-0AB0 when PROFIBUS DP master operation is required.
  • Do not plan a firmware upgrade to V3.2 or later for this hardware generation.
Hot Selling Models
BE5982.02 0044292
CA3KN31BD LA4KC1B
HY15036
KQ2L12-G04A
3RH1140-1AP00 3RH1911-1FA40 3RT1916-1BD00
S432-20877-A182 S432-SE0869
3RA2911-2AA00
3TH4346-0B
R066804000 R0668040XX
3RV2011-0HA10 3RV2901-2E
AR20F02A
FAZ-K8/3 278908 FAZ-XHIN11
3RU2116-0JB0 3RU2916-3AA01
3RA2911-2FA00
3RH2140-1BB40

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.