Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7142 4bf00 0aa0 et 200pro 8 do 24 v dc 0 5 a electronics module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7142-4BF00-0AA0 ET 200pro 8 DO 24 V DC 0.5 A Electronics Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC ET 200pro

6ES7142-4BF00-0AA0 ET 200pro 8 DO 24 V DC 0.5 A Electronics Module

An eight-output ET 200pro electronics module with 0.5 A per channel, module diagnostics and an included bus module, requiring a separate I/O connection module.

At a Glance

Brand Siemens
Model 6ES7142-4BF00-0AA0
Product Type Digital output electronics module
Core Function Switches DC actuators through current-sourcing outputs
Application SIMATIC ET 200pro distributed I/O stations

Eight sourcing outputs

Each output switches up to 0.5 A from the 24 V DC load supply.

Module diagnostics

A red SF indicator identifies group errors, with green output-status indication.

Separate field connector

The bus module is included, while the compatible I/O connection module is ordered separately.

Product Overview

6ES7142-4BF00-0AA0 switches eight current-sourcing digital outputs in a SIMATIC ET 200pro station.

The electronics provide electronic short-circuit protection per channel and module-level fault diagnostics, with 0.5 A rated current per output and a maximum group current of 4 A up to 55 °C; the field-wiring connection module is a separate component.

Ordering focus: Match the 0.5 A channel loads, 4 A group limit, load switching frequency and the separate ET 200pro I/O connection module.
Key Functions

Switch DC loads through eight outputs

The current-sourcing outputs supply DC loads at up to 0.5 A per channel.

Limit and report output faults

Electronic short-circuit protection operates per channel, while short-circuit-to-ground diagnostics are reported at module level.

Show local channel and group status

Green indicators show output status and the red SF indicator identifies a group error.

Official Specifications
Rated load supply 2L+ 24 V DC
Maximum electronics current draw 30 mA from 2L+ without load and 30 mA from the 3.3 V backplane bus
Typical power dissipation 2 W
Output address space 1 byte maximum
Output-current limits 0.5 A per channel; 4 A total per group up to 55 °C in all mounting positions
Typical short-circuit response threshold 0.7 A
Inductive shutdown-voltage limit 2L+ minus 47 V
Maximum lamp load 5 W
Load resistance 48 Ω to 4 kΩ
Minimum high-state output voltage 2L+ minus 0.8 V
Maximum off-state residual current 0.5 mA
Maximum resistive-load switching frequency 100 Hz
Maximum inductive-load switching frequency 0.5 Hz
Maximum lamp-load switching frequency 1 Hz
Maximum field-cable length 30 m for shielded or unshielded cable
Isolation test voltage 707 V DC, type test
Output isolation arrangement No isolation between channels; isolation between channels and the backplane bus
Local indicators Red SF group-error indicator and green digital-output status indicators
Dimensions (W × H × D) 45 × 130 × 35 mm
Approximate weight 140 g
Frequently Asked Questions

Can two outputs of 6ES7142-4BF00-0AA0 be paralleled to increase the load current?

Parallel operation is not permitted for increasing current capacity.

How fast can 6ES7142-4BF00-0AA0 switch an inductive load?

The maximum switching frequency for an inductive load is 0.5 Hz.

Does 6ES7142-4BF00-0AA0 identify short circuits by individual diagnostic channel?

Short circuits from outputs to ground are diagnosed module by module rather than as individual channel diagnostic messages.

Is the field connection module included with 6ES7142-4BF00-0AA0?

The bus module is included, but the compatible I/O connection module must be ordered separately.

How long may a field cable connected to 6ES7142-4BF00-0AA0 be?

The maximum field-cable length is 30 m for either shielded or unshielded cable.

Can all outputs of 6ES7142-4BF00-0AA0 carry their rated current at the same time?

The outputs may each carry 0.5 A within the 4 A group limit up to 55 °C in all mounting positions.

Are the output channels of 6ES7142-4BF00-0AA0 galvanically isolated from each other?

The output channels share a potential, while isolation is provided between the channels and the backplane bus.

Compatibility & Ordering Notes
Before ordering 6ES7142-4BF00-0AA0: Select the standard eight-output electronics module, order the matching 6ES7194-4..00-0AA0 I/O connection module and size the wiring and loads for the per-channel and group limits.

Compatibility Checklist for 6ES7142-4BF00-0AA0

  • Use a 24 V DC load supply and stay within 0.5 A per channel and 4 A per group up to 55 °C.
  • Order the required I/O connection module separately from the included bus module.
  • Do not parallel outputs for increased current; the supported parallel case is redundant control of a load.
  • Observe the different switching-frequency limits for resistive, inductive and lamp loads.
  • Keep shielded or unshielded field cables within 30 m.
  • When driving a digital input, jumpering 1M and 2M removes the separation between 1L+ and 2L+.
Hot Selling Models
NBB2-8GM40-E3-V3 304615-0062
NBN3-8GM​​25-E3-V3 304615-0016
TS-9106-8210 PT1000
B3.1/4-PKZ0
D8AW3 0112240
6ES7193-0CA30-0XA0 6ES7192-0BA01-0XB0
3RV1031-4HB10
IB040176
ADVU-40-10-APA
2963776 PSR-SCP-24UC/ESM4/3X1/1X2/B
BES0137 BES M05ED-POC15B-S26G
CIPKZ0G
6SE7037-0EK84-1BH0
AC2032
P1KS003

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.