Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7132 4bf50 0aa0 et 200s eight channel sink output module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7132-4BF50-0AA0 ET 200S Eight-Channel Sink Output Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC ET 200S

6ES7132-4BF50-0AA0 ET 200S Eight-Channel Sink Output Module

A compact eight-output sink module with selectable station addressing, green output-state LEDs and load-dependent switching rates.

At a Glance

Brand Siemens
Model 6ES7132-4BF50-0AA0
Product Type Digital output electronics module
Core Function Sinking control of DC loads
Application Distributed actuator stations

Load-dependent rates

Resistive, inductive and lamp loads have different maximum switching rates.

Local output indication

Green LEDs show output states without a module diagnostic function.

15 mm assembly

The electronics module measures 15 × 81 × 52 mm.

Product Overview

6ES7132-4BF50-0AA0 controls eight DC actuator circuits using sinking transistor outputs in an ET 200S distributed station. The 15 mm-wide module supports isochronous operation and occupies no more than one byte of output address space.

Load selection affects the permitted operating rate: resistive circuits can switch faster than inductive circuits. Green LEDs provide local channel-state indication, while channel-to-channel isolation and a diagnostic function are not provided.

Ordering focus: Evaluate the actual actuator load, switching rate and field-cable length before choosing the sink-output module.
Key Functions

Match the switching duty

Maximum switching rates are 100 Hz for resistive loads, 0.5 Hz for inductive loads and 10 Hz for lamp loads.

Connect extended field wiring

Maximum cable lengths are 1,000 m with shielding and 600 m without shielding.

Separate field and backplane potentials

The outputs are isolated from the backplane bus, with insulation tested at 500 V DC.

Official Specifications
Output channels 8 transistor sink outputs
Rated load voltage 24 V DC from the power module
Channel current 0.5 A rated; permissible signal-1 range 5–600 mA
Maximum module current 4 A
Maximum signal-0 residual current 5 µA
Short-circuit protection threshold 1.5 A typical
Inductive shutdown-voltage limit 47 V typical
Maximum lamp load 5 W
Load-resistance range 48–3,400 Ω
Maximum resistive-load delay 300 µs from 0 to 1; 600 µs from 1 to 0
Maximum switching frequency Resistive: 100 Hz; inductive: 0.5 Hz; lamp: 10 Hz
Maximum cable length 1,000 m shielded; 600 m unshielded
Maximum internal currents 5 mA from load voltage L+ without load; 10 mA from the 3.3 V backplane
Typical power loss 1.5 W
Maximum output address space 1 byte
Electrical isolation No isolation between channels; isolation from backplane bus
Insulation test voltage 500 V DC
Output indication and diagnostics Green status indicator; no diagnostic function
Dimensions and weight 15 × 81 × 52 mm (W × H × D); approximately 40 g
Frequently Asked Questions

How often can 6ES7132-4BF50-0AA0 switch an inductive actuator?

The maximum inductive-load switching frequency is 0.5 Hz.

Can 6ES7132-4BF50-0AA0 switch a resistive circuit at 100 Hz?

The maximum switching frequency for a resistive load is 100 Hz.

What can I learn from the green indicators on 6ES7132-4BF50-0AA0?

Each green indicator shows the corresponding digital-output state.

Are neighboring output channels on 6ES7132-4BF50-0AA0 electrically isolated?

There is no electrical isolation between the output channels.

How long can an unshielded actuator cable be on 6ES7132-4BF50-0AA0?

The maximum unshielded cable length is 600 m.

Can two outputs on 6ES7132-4BF50-0AA0 provide redundant control of one load?

Parallel connection for redundant control is permitted within the same module, while current uprating is not permitted.

Will 6ES7132-4BF50-0AA0 reserve more than one output byte?

The maximum address space is one byte per module.

Compatibility & Ordering Notes
Before ordering 6ES7132-4BF50-0AA0: Select the ET 200S sink-output arrangement with the switching rate and field-cable requirements of the connected actuator circuits.

Compatibility Checklist for 6ES7132-4BF50-0AA0

  • Apply 100 Hz, 0.5 Hz and 10 Hz limits to resistive, inductive and lamp loads respectively.
  • Allow 1,000 m shielded or 600 m unshielded cable at most.
  • Use green LEDs for local output-state checks.
  • Keep output circuits within their channel and 4 A module limits.
Hot Selling Models
KA5PNP/KF TSS-300mA
516-361-S4-C
TB-101 ESX10-TB-101-DC24V-6A
IG5602 IGA3008-BPKG/V4A/US-100-DPS
1834 484 236
3RH2131-1BB40 3RT2916-1BB00
ABB S202-B6 2CDS252001R0065
SZC120-101 R681658
KHD2-SOT-Ex2.P
6FX1154-8BB01
1786-TPS/C
VUVS-LK20-M32C-AD-G18-1C1-S
FLOE000010
YMV310-MS-R-3
ADVC-20-15-APA

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.