Siemens 6ES7131-0BL00-0XB0 ET 200B 32-Channel Digital Input Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Select a compatible TB2/DC, TB2-4/DC, TB4/DC or TB4-4/DC terminal block.
- Maintain the supply within 18.5–30.2 V DC and distinguish the logic and sensor supply requirements.
- Apply the 40 °C limit to mounting orientations other than horizontal.
- Allow for the complete electronics-and-terminal-block envelope when checking cabinet space.
6ES7131-0BL00-0XB0 ET 200B 32-Channel Digital Input Module
32 digital inputs for 24 V DC signals with a maximum 3 ms rising-edge input delay and PROFIBUS DP communication.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7131-0BL00-0XB0 |
| Product Type | 32-channel digital input electronics module |
| Core Function | Acquisition of discrete field signals |
| Application | ET 200B PROFIBUS DP stations |
Fast discrete signal acquisition
A maximum 3 ms rising-edge delay supports ordinary machine sensor and switch inputs.
PROFIBUS integration
The station supports PROFIBUS DP at transmission rates up to 12 Mbit/s and the FREEZE service.
Visible input and bus status
Green input status LEDs and a red bus-fault indicator assist local troubleshooting.
Product Overview
6ES7131-0BL00-0XB0 acquires 32 discrete input signals in an ET 200B station and transfers their states over PROFIBUS DP.
The electronics assembly works with the TB2/DC, TB2-4/DC, TB4/DC and TB4-4/DC terminal blocks, allowing the field wiring arrangement to be selected for the application.
Key Functions
Fast discrete signal acquisition
A maximum 3 ms rising-edge delay supports ordinary machine sensor and switch inputs.
PROFIBUS integration
The station supports PROFIBUS DP at transmission rates up to 12 Mbit/s and the FREEZE service.
Visible input and bus status
Green input status LEDs and a red bus-fault indicator assist local troubleshooting.
Official Specifications
| Rated Supply Voltage | 24 V DC; permissible range 18.5–30.2 V |
|---|---|
| Input Signal Levels | Signal 0: −30 to +5 V; signal 1: 13–30 V |
| Typical Input Current at Signal 1 | 4 mA at 24 V |
| Maximum Rising-Edge Delay | 3 ms |
| Logic Current Consumption | 70 mA typical from L5+ |
| Maximum Sensor Supply Current | 1 A from L5+ |
| Typical Power Loss | 4.8 W |
| Maximum PROFIBUS Data Rate | 12 Mbit/s |
| Maximum Unshielded Input Cable | 100 m |
| Two-Wire Sensor Quiescent Current | 1.5 mA maximum |
| Operating Temperature | 0–60 °C horizontally; maximum 40 °C in other mounting positions |
| Assembly Dimensions (W × H × D) | 235 × 130 × 60 mm, electronics and terminal block |
| Approximate Assembly Weight | 800 g, electronics and terminal block |
| Input Wiring | Screw or spring terminals with permanent 3- or 4-wire connection |
Frequently Asked Questions
Which terminal blocks fit 6ES7131-0BL00-0XB0?
The electronics module accepts TB2/DC, TB2-4/DC, TB4/DC and TB4-4/DC terminal blocks.
Will a 12 V sensor signal switch on 6ES7131-0BL00-0XB0?
A high input requires 13–30 V, so a 12 V signal is below the specified high-level range.
Can I use two-wire proximity sensors with 6ES7131-0BL00-0XB0?
Two-wire sensors are connectable when their quiescent current does not exceed 1.5 mA.
How far can unshielded input wiring run from 6ES7131-0BL00-0XB0?
Unshielded input cables can extend up to 100 m.
Which indicators help diagnose a bus problem on 6ES7131-0BL00-0XB0?
The module provides a RUN indicator, a red BF bus-fault indicator and green input-state indicators.
Does 6ES7131-0BL00-0XB0 support freezing input values over PROFIBUS?
The PROFIBUS DP interface supports the FREEZE service.
Can I install 6ES7131-0BL00-0XB0 vertically in a 50 °C cabinet?
Mountings other than horizontal are limited to 40 °C, so 50 °C exceeds the permitted temperature for that orientation.